Cores3-ilda
TakuroFukamizu·cores3-ilda·hardware/rev-a/kicad/CoreS3_ILDA_RevA.kicad_pcb
About the Cores3-ilda PCB
Cores3-ilda is an open source PCB design by TakuroFukamizu, published on GitHub. It is a 2-layer board measuring 280 × 202.8 mm, with 160 components from 77 distinct parts.
Other key parts include the MCP4922-E/P, MCP1501-20E/CHY, NJM4580DD and MCW03-05D12. By type, the board carries 58 resistors, 27 capacitors, 26 test points, 25 jumpers, 11 ICs and 6 connectors.
From the project
2026-10-02 / KiCad 10.0.6 / 2層・280 × 202.84 mm。手はんだと測定を優先した試作設計です。回路図ERC、PCB DRC、回路図とPCBの一致検査はすべて問題0件。実基板での動作・熱・ノイズ・機械的嵌合は未検証です。
2026-10-02 / KiCad 10.0.6 / 2層・280 × 202.84 mm。手はんだと測定を優先した試作設計です。回路図ERC、PCB DRC、回路図とPCBの一致検査はすべて問題0件。実基板での動作・熱・ノイズ・機械的嵌合は未検証です。
編集対象はこのフォルダの kicad/ とBOMです。以下の製造データ・プレビュー・検証結果はリポジトリルートの releases/rev-a/2026-10-02/ に保存した初回設計時点の記録です。設計変更後は再生成し、古い検査結果を流用しないでください。
- kicad/CoreS3ILDARevA.kicadpro をKiCad 10で開く。回路図はルート+13子シート。ローカルシンボル・フットプリントを同梱。 - manufacturing/:表裏銅箔、表裏マスク、表裏シルク、外形Gerber、PTH/NPTH Excellonドリル、ドリル図。 - BOM.csv:部品別明細。BOMgrouped.csv:同一部品の集計。DNPは標準構成では未実装。 - assembly-top.svg:部品配置・機械形状。board-top.png:配線プレビュー。schematicsvg/:全回路図プレビュー。 - verification/`:検査結果と理想DC解析。基板発注設定の目安はFR-4、1.6…
Main components on the Cores3-ilda
Cores3-ilda bill of materials (BOM)
160 components, 77 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | MCP4922-E/P | DIP-14_W7.62mm | U1, U2, U3 |
| 1 | MCP1501-20E/CHY | SOT-23-6 | U4 |
| 6 | NJM4580DD | DIP-8_W7.62mm | U5, U6, U7, U8, U9, U10 |
| 1 | MCW03-05D12 | MCW03_SIP8 | U11 |
| 1 | IRLML6344TRPBF | SOT-23 | Q1 |
| 1 | CoreS3 M5-Bus | M5Bus_CoreS3_TypeA | J1 |
| 1 | 5V external 2A | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J2 |
| 1 | ARM external maintained NO | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J3 |
| 1 | E-STOP loop NC | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | J4 |
| 1 | DMR-25SGG DB25F | DMR25SGG | J5 |
| 1 | Intensity external driver | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | T2A external fuse | TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal | F1 |
| 1 | 5V SOURCE | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | GPIO9 TEST | PinHeader_1x02_P2.54mm_Vertical | JP2 |
| 1 | DAC RUN TEST | PinHeader_1x02_P2.54mm_Vertical | JP3 |
| 1 | R DIFF GAIN | PinHeader_1x02_P2.54mm_Vertical | JP4 |
| 1 | R NEG SEL | PinHeader_1x03_P2.54mm_Vertical | JP5 |
| 1 | G DIFF GAIN | PinHeader_1x02_P2.54mm_Vertical | JP6 |
| 1 | G NEG SEL | PinHeader_1x03_P2.54mm_Vertical | JP7 |
| 1 | B DIFF GAIN | PinHeader_1x02_P2.54mm_Vertical | JP8 |
Show 57 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | B NEG SEL | PinHeader_1x03_P2.54mm_Vertical | JP9 |
| 1 | DB1 X+ | PinHeader_1x02_P2.54mm_Vertical | JP10 |
| 1 | DB2 Y+ | PinHeader_1x02_P2.54mm_Vertical | JP11 |
| 1 | DB3 I+ | PinHeader_1x02_P2.54mm_Vertical | JP12 |
| 1 | DB4 ILOCK_A | PinHeader_1x02_P2.54mm_Vertical | JP13 |
| 1 | DB5 R+ | PinHeader_1x02_P2.54mm_Vertical | JP14 |
| 1 | DB6 G+ | PinHeader_1x02_P2.54mm_Vertical | JP15 |
| 1 | DB7 B+ | PinHeader_1x02_P2.54mm_Vertical | JP16 |
| 1 | DB12 SHUTTER | PinHeader_1x02_P2.54mm_Vertical | JP17 |
| 1 | DB14 X- | PinHeader_1x02_P2.54mm_Vertical | JP18 |
| 1 | DB15 Y- | PinHeader_1x02_P2.54mm_Vertical | JP19 |
| 1 | DB16 I- | PinHeader_1x02_P2.54mm_Vertical | JP20 |
| 1 | DB17 ILOCK_B | PinHeader_1x02_P2.54mm_Vertical | JP21 |
| 1 | DB18 R- | PinHeader_1x02_P2.54mm_Vertical | JP22 |
| 1 | DB19 G- | PinHeader_1x02_P2.54mm_Vertical | JP23 |
| 1 | DB20 B- | PinHeader_1x02_P2.54mm_Vertical | JP24 |
| 1 | DB25 GND | PinHeader_1x02_P2.54mm_Vertical | JP25 |
| 4 | HFD27/005-S | HFD27 | K1, K2, K3, K4 |
| 1 | DAC_X | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | DAC_Y | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | DAC_R | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | DAC_G | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP4 |
| 1 | DAC_B | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP5 |
| 1 | DAC_I | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP6 |
| 1 | X+ | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP7 |
| 1 | X- | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP8 |
| 1 | Y+ | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP9 |
| 1 | Y- | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP10 |
| 1 | R+ | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP11 |
| 1 | R- | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP12 |
| 1 | G+ | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP13 |
| 1 | G- | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP14 |
| 1 | B+ | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP15 |
| 1 | B- | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP16 |
| 1 | VREF_2V048 | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP17 |
| 1 | VCENTER | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP18 |
| 1 | +12V | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP19 |
| 1 | -12V | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP20 |
| 1 | 3V3 | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP21 |
| 1 | 5V | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP22 |
| 1 | GND | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP23 |
| 1 | SHUTTER | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP24 |
| 1 | ENABLE_GPIO | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP25 |
| 1 | COIL_5V | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP26 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 100uF/16V | CP_Radial_D6.3mm_P2.50mm | C1 |
| 22 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C5, C6, C7, C9, C10, C11, C12 +14 |
| 2 | 22uF/25V | CP_Radial_D6.3mm_P2.50mm | C3, C4 |
| 2 | 1uF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C8, C23 |
| 2 | 330R 2W | R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal | R1, R2 |
| 2 | 33R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4 |
| 14 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R7, R8, R9, R10, R51, R52 +6 |
| 19 | 10k 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11, R13, R15, R16, R19, R21, R23, R24 +11 |
| 4 | 47k 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R12, R14, R20, R22 |
| 11 | 100R | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R17, R18, R25, R26, R32, R36, R40, R43 +3 |
| 3 | 2.2k 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R30, R34, R38 |
| 3 | 12k 1% | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R31, R35, R39 |
Cores3-ilda design files
The KiCad project lives in the TakuroFukamizu/cores3-ilda repository on GitHub; these links point at the commit this page was built from.
Cores3-ilda: common questions
How big is the Cores3-ilda PCB?
The Cores3-ilda measures 280 × 202.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cores3-ilda?
160 components, from 77 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cores3-ilda design files?
From the TakuroFukamizu/cores3-ilda repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cores3-ilda design in my own project?
The repository has no license, so all rights stay with TakuroFukamizu. Use it as a reference, and ask the author before reusing the design.