Cubie a5e
About the Cubie a5e PCB
Cubie a5e is an open source PCB design by tcmichals, published on GitHub. It is a 4-layer board measuring 65 × 56 mm, with 1 components from 1 distinct parts.
From the project
This directory contains the complete KiCad hardware design files, schematics, PCB layout, and manufacturing package for the custom flight controller carrier board uniting the Radxa Cubie A5E SBC (Allwinner A527 / T527) and the Sipeed Tang Primer 25K FPGA SOM (Gowin GW5A-LV25).
This directory contains the complete KiCad hardware design files, schematics, PCB layout, and manufacturing package for the custom flight controller carrier board uniting the Radxa Cubie A5E SBC (Allwinner A527 / T527) and the Sipeed Tang Primer 25K FPGA SOM (Gowin GW5A-LV25).
1. 5V BEC Input Stage: TVS Diode: SMBJ6.0A bidirectional 600W TVS clamp (protects against inductive motor braking spikes). LC Filter: 0805 3A Power Ferrite Bead + 47 µF 16V X7R ceramic capacitor + 10 µF + 100 nF decoupling. 2. Dedicated Ultra-Low-Noise 3.3V Sensor LDO: Regulator: SGMicro SGM2036-3.3YN5G (or TI…
Cubie a5e bill of materials (BOM)
1 components, 1 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C1525 100nF (0.1uF) 50V X7R | C1 |
Cubie a5e design files
The KiCad project lives in the tcmichals/cubie-a5e repository on GitHub; these links point at the commit this page was built from.
Cubie a5e: common questions
How big is the Cubie a5e PCB?
The Cubie a5e measures 65 × 56 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Cubie a5e?
1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cubie a5e design files?
From the tcmichals/cubie-a5e repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Cubie a5e design in my own project?
The repository has no license, so all rights stay with tcmichals. Use it as a reference, and ask the author before reusing the design.