Soldered-Dual-H-bridge hardware design
test-gh-syncer2·Soldered-Dual-H-bridge-hardware-design·CAD/V1.1.1/Dual_H-bridge.kicad_pcb
About the Soldered-Dual-H-bridge hardware design PCB
Soldered-Dual-H-bridge hardware design is an open source PCB design by test-gh-syncer2, published on GitHub under the TAPR-OHL-1.0 license. It is a 2-layer board measuring 38 × 38 mm, with 23 components from 16 distinct parts.
Other key parts include the DRV8424PPWPR. By type, the board carries 6 capacitors, 6 resistors, 4 relays, 1 IC, 1 jumper and 1 diode.
From the project
Hardware design, BOM, gerbers, 3D files and pinout for Dual_H-bridge designed by Soldered.
Find XXXXXXXX on our [web store](https://solde.red/ .
All Soldered hardware is designed in KiCAD, and repositories are organised in the following way:
- CAD folder - contains KiCAD files (Schematics, Board, Panel Board), organised by version. Change log lists all changes between different versions. - OUTPUTS - contains useful files, such as Bill of Materials (BOM), PDF of schematics, 3D .step file of the board and gerber files, organised by version.
Main components on the Soldered-Dual-H-bridge hardware design
Soldered-Dual-H-bridge hardware design bill of materials (BOM)
23 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8424PPWPR | HTSSOP-28 | U1 |
| 4 | HOLE_3.2MM HOLE_3.2mm | HOLE_3.2mm | H1, H2, H3, H4 |
| 1 | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | SMD-JUMPER-CONNECTED_TRACE_SLODERMASK | JP1 |
| 3 | TERMINAL_KF235-5.0-2P | TERMINAL_KF235-5.0-2P | K1, K2, K3 |
| 1 | HEADER_MALE_7X1 | HEADER_MALE_7X1 | K4 |
| 1 | purple | 0402LED | D1 |
| 2 | 08051C103KAT2A | 0805C | C1, C3 |
| 1 | VKMD1451K101MV | ELECTROLITIC_CAP_8x8x14.5 | C2 |
| 1 | AC0603KRX7R9BB224 | 0603C | C4 |
| 1 | 100NF 100nF | 0603C | C5 |
| 1 | C1608X7R2A223K080AA | 0603C | C6 |
| 1 | 2k2 | 0402R | R1 |
| 2 | 10K 10k | 0603R | R2, R4 |
| 1 | 5K1 5k1 | 0603R | R3 |
| 1 | 500K 500k | 0603R | R5 |
| 1 | 200K 200k | 0603R | R6 |
Soldered-Dual-H-bridge hardware design design files
The KiCad project lives in the test-gh-syncer2/Soldered-Dual-H-bridge-hardware-design repository on GitHub; these links point at the commit this page was built from.
Soldered-Dual-H-bridge hardware design: common questions
How big is the Soldered-Dual-H-bridge hardware design PCB?
The Soldered-Dual-H-bridge hardware design measures 38 × 38 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Soldered-Dual-H-bridge hardware design?
23 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Soldered-Dual-H-bridge hardware design design files?
From the test-gh-syncer2/Soldered-Dual-H-bridge-hardware-design repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Soldered-Dual-H-bridge hardware design design in my own project?
Yes, under the terms of its TAPR-OHL-1.0 license, which test-gh-syncer2 chose for the repository.