Stm32u5 custom
theblacktyper·stm32u5_custom_pcb
About the Stm32u5 custom PCB
Stm32u5 custom is an open source STM32 PCB design by theblacktyper, published on GitHub. It is a 4-layer board measuring 80 × 80 mm, with 50 components from 27 distinct parts.
Its main chip is the STM32U585RITx, from the STM32 family. Other key parts include the ST1L05APU33R and ESDALC6V1P5. By type, the board carries 15 capacitors, 15 resistors, 7 diodes, 5 connectors, 4 switches and 3 ICs.
From the project
This is a KiCAD project repo for a custom PCBA containing a STM32U5 MCU
Main components on the Stm32u5 custom
Stm32u5 custom bill of materials (BOM)
50 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32U585RITx | LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | ST1L05APU33R | DFN_5APU33R_STM | U2 |
| 1 | ESDALC6V1P5 | SOT-665_STM | U3 |
| 1 | 54-00356 | TENSILITY_54-00356 | J3 |
| 1 | Conn 02x09 Socket RA TH | PinSocket_2x09_P2.54mm_Horizontal | J4 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Horizontal | J5 |
| 2 | Conn_01x03 | PinHeader_1x03_P2.54mm_Vertical | J7, J8 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | KSEM31JLFS | KSEx31J_CNK | SW1 |
| 1 | CJS-1200TB | CJS-1200B_NDC | SW2 |
| 2 | KSC721JLFS | SW_KSC721JLFS | SW3, SW4 |
| 3 | ESDALC6V1-1M2 | SOD882_STM | D1, D6, D7 |
| 1 | ESDA7P120-1U1M | TVS_ESDA7P120-1U1M | D2 |
| 3 | LED | LED_0603_1608Metric | D3, D4, D5 |
| 9 | 100nF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C4, C5, C6, C13, C14, C15, C16 +1 |
| 2 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7, C11 |
| 2 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C10 |
| 1 | 10uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C9 |
| 1 | 10uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12 |
| 1 | 10K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0R | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2 |
| 2 | 270 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R7 |
| 4 | 3.3K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5, R6, R11, R12 |
| 1 | 330 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8 |
| 2 | 47 | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R9, R10 |
| 2 | 20K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R16 |
| 2 | 200 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14, R15 |
Stm32u5 custom design files
The KiCad project lives in the theblacktyper/stm32u5_custom_pcb repository on GitHub; these links point at the commit this page was built from.
- Layoutkk_custom_stm32u5.kicad_pcb
- Schematickk_custom_stm32u5.kicad_sch
Stm32u5 custom: common questions
What microcontroller does the Stm32u5 custom use?
The Stm32u5 custom is built around the STM32U585RITx, from the STM32 family.
How big is the Stm32u5 custom PCB?
The Stm32u5 custom measures 80 × 80 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Stm32u5 custom?
50 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32u5 custom design files?
From the theblacktyper/stm32u5_custom_pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stm32u5 custom design in my own project?
The repository has no license, so all rights stay with theblacktyper. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32u5 custom without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k