Neutron c

TheZoq2·ergodoxer·neutron-c/neutron-c.kicad_pcb

Neutron c PCB layout, top view — open source STM32 board by TheZoq2

About the Neutron c PCB

Neutron c is an open source STM32 PCB design by TheZoq2, published on GitHub. It is a 2-layer board measuring 20.8 × 51.3 mm, with 29 components from 22 distinct parts.

Its main chip is the STM32F103RGTx, from the STM32 family. Other key parts include the LM1117-3.3. By type, the board carries 10 resistors, 8 capacitors, 4 connectors, 2 ICs, 2 crystals and 2 diodes.

It belongs with the keyboards designs in this gallery.

From the project

An ergodox inspired split keyboard with more keys than a standard ergodox

Main components on the Neutron c

STM32F103RGTxLM1117-3.3

Neutron c bill of materials (BOM)

29 components, 22 distinct parts.

QtyPartRefs
1
STM32F103RGTx
U1
1
LM1117-3.3
U2
1
32k768
Y1
1
8M0
Y2
2
Conn_01x20
J1, J4
1
Conn_01x04_Male
J6
1
USB_C_Receptacle_USB2.0
J7
1
SW_Push
SW1
1
LED_green
D1
1
LED_red
D2
1
C
C1
2
100p
C2, C3
2
12p
C4, C5
1
100n
C6
1
10uF1
C7
1
10uF2
C8
1
10k
R1
2
670
R2, R3
1
1.5k
R4
2
22R
R5, R6
Show 2 more
QtyPartRefs
2
100k
R7, R8
2
5.1k
R9, R10

Neutron c design files

The KiCad project lives in the TheZoq2/ergodoxer repository on GitHub; these links point at the commit this page was built from.

Neutron c: common questions

What microcontroller does the Neutron c use?

The Neutron c is built around the STM32F103RGTx, from the STM32 family.

How big is the Neutron c PCB?

The Neutron c measures 20.8 × 51.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Neutron c?

29 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Neutron c design files?

From the TheZoq2/ergodoxer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Neutron c design in my own project?

The repository has no license, so all rights stay with TheZoq2. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Neutron c without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in ergodoxer

Similar boards