Mash
About the Mash PCB
Mash is an open source PCB design by tjhiker, published on GitHub. It is a 2-layer board measuring 20.3 × 20.3 mm, with 4 components from 3 distinct parts.
By type, the board carries 2 diodes and 1 resistor.
From the project
My Personal MiniBadges used at SAINTCON 2025
Mash bill of materials (BOM)
4 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ~ | MiniBadge_Simple_Edge_Curved | MB1 |
| 2 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1, D2 |
| 1 | R_US | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
Mash design files
The KiCad project lives in the tjhiker/Personal-MiniBadges-2025 repository on GitHub; these links point at the commit this page was built from.
- Layout2025-MB-MASH/mash.kicad_pcb
- Schematic2025-MB-MASH/mash.kicad_sch
Mash: common questions
How big is the Mash PCB?
The Mash measures 20.3 × 20.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mash?
4 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mash design files?
From the tjhiker/Personal-MiniBadges-2025 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mash design in my own project?
The repository has no license, so all rights stay with tjhiker. Use it as a reference, and ask the author before reusing the design.
More boards in Personal-MiniBadges-2025
AVR/ArduinoCollectorPanel
157.5 × 81.3 mm22 parts2LNo license7
BackPanel
157.5 × 45.7 mm20 parts2LNo license7
C3PO
35.9 × 62 mm7 parts2LNo license7
AVR/ArduinoProtoTypeFN
174.1 × 69.9 mm7 parts2LNo license7
Labubu
20 × 36 mm5 parts2LNo license7
STG
20.3 × 20.3 mm4 parts2LNo license7
Ba
20.3 × 20.3 mm4 parts2LNo license7
Discord
20.3 × 20.3 mm4 parts2LNo license7
Mesh
20.3 × 20.3 mm4 parts2LNo license7
MDew
20.3 × 20.3 mm3 parts2LNo license7
Berly
20 × 21 mm3 parts2LNo license7