R2W Pi PGS
About the R2W Pi PGS PCB
R2W Pi PGS is an open source PCB design by tmtrcreations, published on GitHub. It is a 2-layer board measuring 171.7 × 76.2 mm, with 45 components from 25 distinct parts.
Other key parts include the PAM2306AYPKE, AP7115-25SEG, DDR2_SODIMM_CM_3_Lite and 1040310811. By type, the board carries 18 capacitors, 10 switches, 7 resistors, 4 ICs, 3 connectors and 2 inductors.
From the project
Open source handheld gaming device based on the Raspberry Pi CM3L
Main components on the R2W Pi PGS
R2W Pi PGS bill of materials (BOM)
45 components, 25 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PAM2306AYPKE | PAM2306AYPKE | U1 |
| 1 | AP7115-25SEG | AP7115-25SEG-7 | U2 |
| 1 | DDR2_SODIMM_CM_3_Lite | Socket_SODIMM_DDR2 | U3 |
| 1 | 1040310811 | uSD_1040310811 | U4 |
| 2 | USB_OTG | USB_Micro-B_10103594-0001LF | J1, J2 |
| 1 | 40_Pin_LCD | LCD_Molex_Connector | J3 |
| 1 | MF-MSMF200 | MF-MSMF200 | F1 |
| 1 | R_BUMP | Tact-switch_right_thru_hole | SW1 |
| 1 | L_BUMP | Tact-switch_right_thru_hole | SW2 |
| 1 | UP | E-SW_SMD | SW3 |
| 1 | X | E-SW_SMD | SW4 |
| 1 | LEFT | E-SW_SMD | SW5 |
| 1 | RIGHT | E-SW_SMD | SW6 |
| 1 | Y | E-SW_SMD | SW7 |
| 1 | A | E-SW_SMD | SW8 |
| 1 | DOWN | E-SW_SMD | SW9 |
| 1 | B | E-SW_SMD | SW10 |
| 2 | 4.7uH | SRN4018-4R7M | L1, L2 |
| 4 | 10uF | C_0805 | C1, C4, C6, C7 |
| 6 | 47uF | C_1206 | C2, C12, C14, C15, C16, C17 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 4.7uF | C_0603 | C3, C9, C18 |
| 2 | 100nF | C_0402 | C5, C10 |
| 3 | 1uF | C_0402 | C8, C11, C13 |
| 6 | 100k | R_0402 | R1, R2, R3, R4, R5, R6 |
| 1 | 10k | R_0805 | R7 |
R2W Pi PGS design files
The KiCad project lives in the tmtrcreations/R2W_Pi_PGS repository on GitHub; these links point at the commit this page was built from.
- LayoutR2W_Pi_PGS.kicad_pcb
R2W Pi PGS: common questions
How big is the R2W Pi PGS PCB?
The R2W Pi PGS measures 171.7 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the R2W Pi PGS?
45 components, from 25 distinct parts. The full bill of materials is listed on this page.
Where can I download the R2W Pi PGS design files?
From the tmtrcreations/R2W_Pi_PGS repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the R2W Pi PGS design in my own project?
The repository has no license, so all rights stay with tmtrcreations. Use it as a reference, and ask the author before reusing the design.