7 open source boards using the PAM2306AYPKE
Real designs built with the PAM2306AYPKE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Pi-Compute-3-Lite-BLANK
tmtrcreations
43.6 × 37.8 mm33 parts2LNo license30Pi compute device
marcbperez
95.3 × 69.9 mm66 parts2LApache-2.011R2W Pi PGS
tmtrcreations
171.7 × 76.2 mm45 parts2LNo license5CyCompute
M2I-HABET
230 × 70 mm29 parts2LNo license3Rpi zero-2w
CopperPilot
60 × 20.4 mm93 parts6LNo license1STM32
STDC
SebastianThomas
38 × 48 mm120 parts4LNo license0PiCM3 GBA
SethBarberee
130.7 × 72.9 mm48 parts4LNo license0
How designs wire the PAM2306AYPKE
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the PAM2306AYPKE connects to, and the resistors, capacitors and other passives placed on it.
- The VIN2 pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 4.7 µF).
- The LX2 pin has a inductor on 6 of 7 designs, most often 4.7 µH (then 2.2 µH).
- The VIN1 pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 4.7 µF).
- The LX1 pin has a inductor on 6 of 7 designs, most often 4.7 µH.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VIN2pin 1 | Connected to: 5V 71% · a signal 29% |
|
| LX2pin 2 | Connected to: Signal 86% |
|
| GNDpin 3, 9, 13 | Connected to: GND 100% | — |
| NC1pin 5 | Connected to: Not connected 100% | — |
| EN1pin 6 | Connected to: 5V 71% · a signal 29% | — |
| VIN1pin 7 | Connected to: 5V 71% · a signal 29% |
|
| LX1pin 8 | Connected to: Signal 86% |
|
| FB2pin 10 | Connected to: 1.8V 67% · a signal 33% |
|
| NC2pin 11 | Connected to: Not connected 100% | — |
| EN2pin 12 | Connected to: Signal 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Pi-Compute-3-Lite-BLANK by tmtrcreations, Pi compute device by marcbperez, R2W Pi PGS by tmtrcreations and CyCompute by M2I-HABET.
The PAM2306AYPKE in open source designs
The gallery holds 7 open source boards using the PAM2306AYPKE from 7 GitHub repositories; a typical one measures about 95.3 × 69.8 mm and carries around 48 components.
57% are two-layer designs, the rest use four layers or more, and 14% carry an open source license.
The most starred is Pi-Compute-3-Lite-BLANK by tmtrcreations.
Parts used alongside the PAM2306AYPKE
Microcontrollers on boards using the PAM2306AYPKE
What boards using the PAM2306AYPKE are built for
PAM2306AYPKE: common questions
Where can I find a PAM2306AYPKE reference design?
Each of the 7 boards on this page is a real design using the PAM2306AYPKE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the PAM2306AYPKE VIN2 pin?
The VIN2 pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the PAM2306AYPKE.
How is the PAM2306AYPKE LX2 pin connected?
The LX2 pin has a inductor on 6 of 7 designs, most often 4.7 µH (then 2.2 µH). Counted from the KiCad layouts of 7 open source designs using the PAM2306AYPKE.
What decoupling capacitors do designs use on the PAM2306AYPKE VIN1 pin?
The VIN1 pin has a decoupling capacitor on 6 of 7 designs, most often 10 µF (then 4.7 µF). Counted from the KiCad layouts of 7 open source designs using the PAM2306AYPKE.
What parts are used alongside the PAM2306AYPKE?
The 1040310811, AP7115-25SEG and DDR2_SODIMM_CM_3_Lite appear in the most repositories here.
Which microcontrollers do boards using the PAM2306AYPKE use?
Most are built on STM32 (1).
How big is a typical board using the PAM2306AYPKE?
The median is 95.3 × 69.8 mm, and 57% are two-layer designs.
What is the most popular open source board using the PAM2306AYPKE?
By GitHub stars, Pi-Compute-3-Lite-BLANK by tmtrcreations, with 30 stars.
Can I simulate one of these boards using the PAM2306AYPKE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.