Motortreiber001
About the Motortreiber001 PCB
Motortreiber001 is an open source PCB design by Toberfra, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 80 × 50 mm, with 24 components from 14 distinct parts.
Other key parts include the ADuM260N and DRV8823. By type, the board carries 10 capacitors, 6 resistors, 4 connectors and 2 ICs.
From the project
Ein Cocktailmixer
Er Besteht aus mehreren Komponenten: - Vielen Peristalik Pumpen. - Diese können 3D gedruckt werden. Siehe Hardware/Pumpe/Pumpe3 - Sie werden von einem Nema 17 Schrittmotor angetrieben. - Motor ansteuerung der Schrittmotoren. - Sotware für ATmege32 - Datenbank (MariaDB) - Rezepte der Getränke - Daten der einzelnen Punmpen - Daten der Gläser - Sofware zum Bestellen und Ansteuerung der Pumpen
Main components on the Motortreiber001
Motortreiber001 bill of materials (BOM)
24 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADuM260N | SOIC-16W_7.5x12.8mm_P1.27mm | U1 |
| 1 | DRV8823 | TSSOP-48_6.1x12.5mm_P0.5mm | U2 |
| 1 | Conn_02x05_Odd_Even | PinSocket_2x05_P2.54mm_Vertical | J1 |
| 2 | Screw_Terminal_01x04 | PhoenixContact_MCV_1,5_4-G-5.08_1x04_P5.08mm_Vertical | J2, J3 |
| 1 | Screw_Terminal_01x02 | PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical | J4 |
| 2 | R_POT_TRIM | Potentiometer_Vishay_43_Horizontal | RV1, RV2 |
| 2 | 1nF | C_0805_2012Metric | C1, C2 |
| 3 | 100nf | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C6, C8 |
| 1 | 100nF | C_Disc_D7.5mm_W2.5mm_P5.00mm | C5 |
| 1 | 10nF | C_0805_2012Metric | C7 |
| 2 | 100nF | C_Disc_D8.0mm_W5.0mm_P5.00mm | C9, C10 |
| 1 | 100uF | CP_Radial_D8.0mm_P3.50mm | C11 |
| 2 | R | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1, R3 |
| 4 | 0R5 | R_Axial_DIN0411_L9.9mm_D3.6mm_P5.08mm_Vertical | R5, R6, R7, R8 |
Motortreiber001 design files
The KiCad project lives in the Toberfra/Getraenkeautomat002 repository on GitHub; these links point at the commit this page was built from.
Motortreiber001: common questions
How big is the Motortreiber001 PCB?
The Motortreiber001 measures 80 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Motortreiber001?
24 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Motortreiber001 design files?
From the Toberfra/Getraenkeautomat002 repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Motortreiber001 design in my own project?
Yes, under the terms of its GPL-3.0 license, which Toberfra chose for the repository.
