Fixedwing fcu

tobiadetula·fixedwing-fcu·hardware/kicad-project/fixedwing-fcu.kicad_sch

This repository ships a schematic but no board layout.

About the Fixedwing fcu PCB

Fixedwing fcu is an open source STM32 PCB design by tobiadetula, published on GitHub. It is a board, with 2 components from 2 distinct parts.

Its main chip is the STM32F401CCUx, from the STM32 family.

From the project

Open Source Fixed Wing FCU

This directory contains all hardware design files for the Fixed Wing Flight Control Unit (FCU).

- PCB Design: KiCad 6.0 or later - CAD: FreeCAD, Fusion 360, or SolidWorks - Version Control: Git

1. Install KiCad from https://www.kicad.org/ 2. Open the project file in /pcb or /schematics 3. Review the design documentation in /docs/design 4. Check the BOM for required components

Main components on the Fixedwing fcu

Fixedwing fcu bill of materials (BOM)

2 components, 2 distinct parts.

QtyPartRefs
1
STM32F401CCUx
U1
1
MountingHole_M3_3.2mm_Pad
H1

Fixedwing fcu design files

The KiCad project lives in the tobiadetula/fixedwing-fcu repository on GitHub; these links point at the commit this page was built from.

Fixedwing fcu: common questions

What microcontroller does the Fixedwing fcu use?

The Fixedwing fcu is built around the STM32F401CCUx, from the STM32 family.

How many components are on the Fixedwing fcu?

2 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the Fixedwing fcu design files?

From the tobiadetula/fixedwing-fcu repository on GitHub, which has the schematic; the links under Design files point to each one.

Can I use the Fixedwing fcu design in my own project?

The repository has no license, so all rights stay with tobiadetula. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Fixedwing fcu without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards