Datamaskinprosjekt gruppe-2

TormodDynna·Datamaskinprosjekt-gruppe-2-kicad·tegnebrett/tegnebrett.kicad_pcb

Datamaskinprosjekt gruppe-2 PCB layout, top view — open source STM32 board by TormodDynna

About the Datamaskinprosjekt gruppe-2 PCB

Datamaskinprosjekt gruppe-2 is an open source STM32 PCB design by TormodDynna, published on GitHub. It is a 6-layer board measuring 195.3 × 101 mm, with 204 components from 58 distinct parts.

Its main chip is the STM32U5G7VJTxQ, from the STM32 family. Other key parts include the XC7A100T-2FTG256I, Oscillator 100MHz, IS66WVH16M8DBLL-100B1LI1, VGA Transceiver and VGA Transciever. By type, the board carries 86 capacitors, 79 resistors, 9 connectors, 8 ICs, 6 switches and 5 diodes.

From the project

Kicad av datamaskinsprosjekt gruppe 2

Datamaskinprosjekt gruppe-2, from the project README
From the project README

Main components on the Datamaskinprosjekt gruppe-2

STM32U5G7VJTxQXC7A100T-2FTG256IOscillator 100MHzIS66WVH16M8DBLL-100B1LI1VGA TransceiverVGA TranscieverTPS54294PWP2TPS54294PWP1

Datamaskinprosjekt gruppe-2 bill of materials (BOM)

204 components, 58 distinct parts.

QtyPartRefs
1
STM32U5G7VJTxQ
U1
1
XC7A100T-2FTG256I
U2
1
Oscillator 100MHz
U3
1
IS66WVH16M8DBLL-100B1LI1
U4
1
VGA Transceiver
U5
1
VGA Transciever
U6
1
TPS54294PWP2
U7
1
TPS54294PWP1
U8
1
48MHz
Y1
1
FH12-45S-0.5SH55
J1
1
FH12-6S-1SH55
J2
1
Conn_ST_STDC14
J3
1
USB-A1HSW6
J4
1
MCU_Header_Pin
J5
1
FPGA_debug
J6
1
FPGA_Header_Pin
J7
1
DA15_Socket
J8
1
PJ-002A
J9
1
GD25F128FS2GR1
F1
4
Jumper_2_Open
JP1, JP2, JP3, JP4
Show 38 more
QtyPartRefs
2
SW_Push
SW1, SW2
1
MCU_Button
SW3
1
Reset
SW4
1
Undo
SW5
1
FPGA_Button
SW6
5
LED
D1, D2, D3, D4, D5
1
2.2µ
L1
2
1.5u
L2, L5
1
2u2
L3
1
3u3
L4
2
6p
C1, C2
2
1µ
C3, C16
21
100n
C4, C5, C6, C7, C9, C10, C12, C15 +13
2
10µ
C8, C14
2
2.2µ
C11, C13
4
47u
C17, C27, C28, C30
4
1u
C23, C24, C75, C78
1
330u
C29
1
100u
C31
12
4u7
C32, C33, C34, C35, C37, C38, C39, C40 +4
21
470n
C36, C41, C42, C43, C45, C46, C47, C49 +13
8
22u
C65, C66, C67, C68, C83, C84, C85, C86
6
10u
C69, C70, C74, C77, C80, C81
13
4.7k
R1, R3, R4, R5, R7, R8, R9, R18 +5
4
10k
R2, R15, R16, R23
14
270
R6, R10, R25, R26, R50, R51, R52, R54 +6
4
47
R11, R12, R13, R14
1
330
R17
1
2.4k
R21
16
100K
R28, R29, R30, R31, R32, R33, R34, R35 +8
15
536
R42, R43, R44, R45, R46, R47, R48, R49 +7
2
100
R66, R67
1
6.81k
R69
4
22.1k
R70, R72, R76, R78
1
73.2k
R71
1
124k
R75
1
30.1k
R77
1
12
R79

Datamaskinprosjekt gruppe-2 design files

The KiCad project lives in the TormodDynna/Datamaskinprosjekt-gruppe-2-kicad repository on GitHub; these links point at the commit this page was built from.

Datamaskinprosjekt gruppe-2: common questions

What microcontroller does the Datamaskinprosjekt gruppe-2 use?

The Datamaskinprosjekt gruppe-2 is built around the STM32U5G7VJTxQ, from the STM32 family.

How big is the Datamaskinprosjekt gruppe-2 PCB?

The Datamaskinprosjekt gruppe-2 measures 195.3 × 101 mm, has 6 copper layers and is 1.6 mm thick.

How many components are on the Datamaskinprosjekt gruppe-2?

204 components, from 58 distinct parts. The full bill of materials is listed on this page.

Where can I download the Datamaskinprosjekt gruppe-2 design files?

From the TormodDynna/Datamaskinprosjekt-gruppe-2-kicad repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Datamaskinprosjekt gruppe-2 design in my own project?

The repository has no license, so all rights stay with TormodDynna. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Datamaskinprosjekt gruppe-2 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards