GPIO - DG509B-HEADER

tronixio·modules·Kicad/gpio-dg509b-header/main.kicad_pcb

GPIO - DG509B-HEADER PCB layout, top view — open source board by tronixio

About the GPIO - DG509B-HEADER PCB

GPIO - DG509B-HEADER is an open source PCB design by tronixio, published on GitHub. It is a 2-layer board measuring 50 × 25 mm, with 9 components from 8 distinct parts.

Other key parts include the DG509B and 3M-SJ5376. By type, the board carries 4 relays, 2 ICs, 2 capacitors and 1 resistor.

From the project

- TODO : Work in progress, prototype was not good, hardware, PCB and code can be rework. - DRAFT : Prototype OK, last check schematic, PCB & code can be modify.

- TODO : Work in progress, prototype was not good, hardware, PCB and code can be rework. - DRAFT : Prototype OK, last check schematic, PCB & code can be modify.

THIS CODE IS PROVIDED WITHOUT ANY WARRANTY OR GUARANTEES. USERS MAY USE THIS CODE FOR DEVELOPMENT AND EXAMPLE PURPOSES ONLY. AUTHORS ARE NOT RESPONSIBLE FOR ANY ERRORS, OMISSIONS, OR DAMAGES THAT COULD RESULT FROM USING THIS FIRMWARE IN WHOLE OR IN PART.

Main components on the GPIO - DG509B-HEADER

DG509B3M-SJ5376

GPIO - DG509B-HEADER bill of materials (BOM)

9 components, 8 distinct parts.

QtyPartRefs
1
DG509B
U1
1
3M-SJ5376
U2
1
GPIO IN
K1
1
I/O
K2
1
VIN
K3
1
I/O
K4
2
100n
C1, C2
1
100k
R1

GPIO - DG509B-HEADER design files

The KiCad project lives in the tronixio/modules repository on GitHub; these links point at the commit this page was built from.

GPIO - DG509B-HEADER: common questions

How big is the GPIO - DG509B-HEADER PCB?

The GPIO - DG509B-HEADER measures 50 × 25 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the GPIO - DG509B-HEADER?

9 components, from 8 distinct parts. The full bill of materials is listed on this page.

Where can I download the GPIO - DG509B-HEADER design files?

From the tronixio/modules repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the GPIO - DG509B-HEADER design in my own project?

The repository has no license, so all rights stay with tronixio. Use it as a reference, and ask the author before reusing the design.

More boards in modules