Jukebox
TuDo-Makerspace·Jukebox·Lamps/v1/LampDriver.kicad_pcb
About the Jukebox PCB
Jukebox is an open source PCB design by TuDo-Makerspace, published on GitHub. It is a 2-layer board measuring 100 × 70 mm, with 16 components from 8 distinct parts.
Other key parts include the DCDC_StepDown_LM2596. By type, the board carries 6 resistors, 4 connectors, 3 ICs and 3 transistors.
From the project
Pimp my Jukebox
This repository contains everything related to our sacred Jukebox. For more information, please refer to one of the following sections:
- Usage - Hardware Documentation - Software Documentation TODO
Main components on the Jukebox
Jukebox bill of materials (BOM)
16 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | DCDC_StepDown_LM2596 | YAAJ_DCDC_StepDown_LM2596_Foxed | U1, U2, U3 |
| 3 | IRFZ44N | TO-220-3_Horizontal_TabDown | Q1, Q2, Q3 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | JST XH 1x4 | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | Conn_01x06 | Molex_KK-396_5273-06A_1x06_P3.96mm_Vertical | J3 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 3 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R3, R5 |
| 3 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R4, R6 |
Jukebox design files
The KiCad project lives in the TuDo-Makerspace/Jukebox repository on GitHub; these links point at the commit this page was built from.
- LayoutLamps/v1/LampDriver.kicad_pcb
- SchematicLamps/v1/LampDriver.kicad_sch
Jukebox: common questions
How big is the Jukebox PCB?
The Jukebox measures 100 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Jukebox?
16 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Jukebox design files?
From the TuDo-Makerspace/Jukebox repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Jukebox design in my own project?
The repository has no license, so all rights stay with TuDo-Makerspace. Use it as a reference, and ask the author before reusing the design.