LBS 4 - Front Plate
About the LBS 4 - Front Plate PCB
LBS 4 - Front Plate is an open source PCB design by TweetyDaBird, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 88.6 × 45 mm, with 9 components from 3 distinct parts.
It belongs with the keyboards designs in this gallery.
From the project
A family of macropads featuring a large Encoder wheel and (1?)/4 or 6 keys.
A low-cost and easy to build macro pad intended for among other things media controls.
- Uses an RP2040 Zero or equivalent controller - Programmable with QMK and VIAL - Cherry MX style keyswitches - Kaihl hot swap sockets - Clickable Rotary encoder with up to 40mm wheel - Optional Per Key RGB - Designed with a complete sandwich case for an easy build
[cc-by-sa]: http://creativecommons.org/licenses/by-sa/4.0/ [cc-by-sa-image]: https://licensebuttons.net/l/by-sa/4.0/88x31.png [cc-by-sa-shield]: https://img.shields.io/badge/License-CC%20BY--SA%204.0-lightgrey.svg
LBS 4 - Front Plate bill of materials (BOM)
9 components, 3 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | Hole | Spacer Plate hole | H1, H2, H3, H4 |
| 4 | SW_Push | SW_MX_Plate_Placeholder_nodrill_NOBORDER | SW1, SW2, SW3, SW4 |
| 1 | Rotary_Encoder_Switch | Encoder_Plate_Placeholder_nodrill | SW7 |
LBS 4 - Front Plate design files
The KiCad project lives in the TweetyDaBird/Little-Big-Scroll repository on GitHub; these links point at the commit this page was built from.
LBS 4 - Front Plate: common questions
How big is the LBS 4 - Front Plate PCB?
The LBS 4 - Front Plate measures 88.6 × 45 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the LBS 4 - Front Plate?
9 components, from 3 distinct parts. The full bill of materials is listed on this page.
Where can I download the LBS 4 - Front Plate design files?
From the TweetyDaBird/Little-Big-Scroll repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the LBS 4 - Front Plate design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which TweetyDaBird chose for the repository.
More boards in Little-Big-Scroll
Little Big Scroll 6
59.2 × 87 mm21 parts2LCC-BY-SA-4.055
AVR/ArduinoLittle Big Scroll 6
59.2 × 87 mm21 parts2LCC-BY-SA-4.055
AVR/ArduinoLittle Big Scroll 4
83.6 × 40 mm19 parts2LCC-BY-SA-4.055
Little Big Scroll 6 - Front Plate
59.2 × 87 mm13 parts2LCC-BY-SA-4.055
LBS6 Front Plate
59.2 × 87 mm11 parts2LCC-BY-SA-4.055
Little Big Scroll 4KEY
83.6 × 40 mm6 parts2LCC-BY-SA-4.055
Little Big Scroll OLED
83.6 × 40 mm5 parts2LCC-BY-SA-4.055
LBS6 Rear Plate
59.2 × 87 mm4 parts2LCC-BY-SA-4.055
Little Big Scroll 6 - Rear Plate
59.2 × 87 mm4 parts2LCC-BY-SA-4.055
LBS4 - Backplate
88.6 × 45 mm4 parts2LCC-BY-SA-4.055
Similar boards
Lily58 Lite Rev3 TOP Case
kata0510
142.5 × 106.4 mm34 parts2LMIT2.3k
Lily58 Pro BOTTOM
142.5 × 106.3 mm5 parts2LMIT2.3k
Lily58
142.5 × 106.3 mm83 parts2LMIT2.3k
Lily58 Pro
142.5 × 106.3 mm83 parts2LMIT2.3k
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k
Pcb top
tompi
132.5 × 95.1 mm18 parts2LCC-BY-4.01.2k