Projet Iot

Vinh1VT·SmartGreenhouse·Iot_PCB/Projet_Iot/Projet_Iot.kicad_pcb

Projet Iot PCB layout, top view — open source board by Vinh1VT

About the Projet Iot PCB

Projet Iot is an open source PCB design by Vinh1VT, published on GitHub. It is a 2-layer board measuring 100.3 × 87.6 mm, with 18 components from 7 distinct parts.

Other key parts include the uPesy_ESP32_Wroom_Low_Power_DevKit, mx8v1_74LS151 and FDC6326L. By type, the board carries 12 connectors, 3 ICs and 3 resistors.

It belongs with the iot & wireless designs in this gallery.

From the project

Ce dépôt contient les sources utilisée dans le projet Mr. Gardener, réalisé en 2026 pour la formation Electronique-Informatique d'année 4 à Polytech Sorbonne.

Ce dépôt contient les sources utilisée dans le projet Mr. Gardener, réalisé en 2026 pour la formation Electronique-Informatique d'année 4 à Polytech Sorbonne.

Ce document n'est qu'une courte description du projet, une documentation plus détaillé peut être trouvée ici

L'objectif principal est de concevoir un système autonome de mesures et de commandes pour la serre de l'école, sur le campus St Cyr l'école. Le systême à donc comme caractéristique :

Main components on the Projet Iot

uPesy_ESP32_Wroom_Low_Power_DevKitmx8v1_74LS151FDC6326L

Projet Iot bill of materials (BOM)

18 components, 7 distinct parts.

QtyPartRefs
1
uPesy_ESP32_Wroom_Low_Power_DevKit
U6
1
mx8v1_74LS151
U7
1
FDC6326L
U11
12
110990030
J8, J9, J11, J14, J17, J18, J23, J24 +4
1
1000
R6
1
100
R7
1
4700
R10

Projet Iot design files

The KiCad project lives in the Vinh1VT/SmartGreenhouse repository on GitHub; these links point at the commit this page was built from.

Projet Iot: common questions

How big is the Projet Iot PCB?

The Projet Iot measures 100.3 × 87.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Projet Iot?

18 components, from 7 distinct parts. The full bill of materials is listed on this page.

Where can I download the Projet Iot design files?

From the Vinh1VT/SmartGreenhouse repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Projet Iot design in my own project?

The repository has no license, so all rights stay with Vinh1VT. Use it as a reference, and ask the author before reusing the design.

Similar boards