Atm90e26 ref

vivmchp·atm90e26_ref·ATM90E26_EVAL/ATM90E26_EVAL/ATM90E26_EVAL.kicad_pcb

Atm90e26 ref PCB layout, top view — open source board by vivmchp

About the Atm90e26 ref PCB

Atm90e26 ref is an open source PCB design by vivmchp, published on GitHub. It is a 2-layer board measuring 80 × 70 mm, with 43 components from 30 distinct parts.

Other key parts include the HLK-10M12, ATM90E26-YU, MIC5209-3.3YS-TR and 24C02Cx-x-SN. By type, the board carries 17 capacitors, 13 resistors, 5 connectors, 4 ICs, 1 crystal and 1 test point.

From the project

atm90e26 reference board for kick start

KiCad 10.0 design for a single-phase energy metering evaluation board based on the Microchip ATM90E26A IC.

- ATM90E26A high-precision energy metering IC (SSOP-28) - HLK-10M12 AC/DC power module (100-240VAC input, 12VDC/10W output) - ZMPT101K voltage transformer (1000:1000) for isolated AC voltage sensing - MIC5209-3.3YS-TR LDO for 3.3V power supply - 24C02C I2C EEPROM for calibration data storage - 10D561 varistor for surge protection - 10-pin header for MCU interface (SPI + I2C) - Single-phase two-wire or three-wire configuration support

Atm90e26 ref, from the project README
From the project README

Main components on the Atm90e26 ref

HLK-10M12ATM90E26-YUMIC5209-3.3YS-TR24C02Cx-x-SN

Atm90e26 ref bill of materials (BOM)

43 components, 30 distinct parts.

QtyPartRefs
1
HLK-10M12
U1
1
ATM90E26-YU
U2
1
MIC5209-3.3YS-TR
U3
1
24C02Cx-x-SN
U4
1
8.192Mhz
Y1
1
AC INPUT
J1
1
Current Input
J2
1
12V Supply
J3
1
3.3V Supply
J4
1
Conn_01x10
J5
1
10D561
RV1
1
3.3VOLT
TP1
1
ZMPT101K
TR1
2
4.7uF/10V
C1, C9
1
1uF/10V
C2
1
0.033uF
C3
1
0.1uF/275V
C4
2
0.33uF
C5, C6
2
1KpF
C7, C8
1
22uF/25V
C10
Show 10 more
QtyPartRefs
4
0.1uF
C11, C12, C16, C17
2
12pF
C13, C14
1
22uF
C15
1
200K/3W
R1
2
2.7E
R2, R3
4
1K
R4, R5, R9, R10
1
10K
R6
2
100E
R7, R8
1
0E
R11
2
1.8K
R12, R13

Atm90e26 ref design files

The KiCad project lives in the vivmchp/atm90e26_ref repository on GitHub; these links point at the commit this page was built from.

Atm90e26 ref: common questions

How big is the Atm90e26 ref PCB?

The Atm90e26 ref measures 80 × 70 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Atm90e26 ref?

43 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the Atm90e26 ref design files?

From the vivmchp/atm90e26_ref repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Atm90e26 ref design in my own project?

The repository has no license, so all rights stay with vivmchp. Use it as a reference, and ask the author before reusing the design.