Wearables-Project
Wearables-MGST-SS-2026·Wearables-Project·Schaltpläne/Akku/Akku.kicad_sch

About the Wearables-Project PCB
Wearables-Project is an open source PCB design by Wearables-MGST-SS-2026, published on GitHub. It is a board, with 22 components from 22 distinct parts.
Other key parts include the LTC3558EUD-TRPBF. By type, the board carries 7 resistors, 6 capacitors, 5 test points, 1 IC, 1 battery holder and 1 inductor.
It belongs with the wearables and sensors designs in this gallery.
From the project
Links für die Bauteile: - Mikrokontroller: https://www.digikey.at/de/products/detail/nordic-semiconductor-asa/NRF52840-QIAA-F-R/15929794 - Akku: https://www.conrad.at/de/p/akyga-lp503040-akkupack-x-spezial-akku-lipo-3-7-v-560-mah-3385838.html - Externer Speicher: noch ausständig
Links für die Bauteile: - Mikrokontroller: https://www.digikey.at/de/products/detail/nordic-semiconductor-asa/NRF52840-QIAA-F-R/15929794 - Akku: https://www.conrad.at/de/p/akyga-lp503040-akkupack-x-spezial-akku-lipo-3-7-v-560-mah-3385838.html - Externer Speicher: noch ausständig - IMU: https://www.digikey.de/de/products/detail/stmicroelectronics/LSM6DSOXTR/9841882 - Pulsoximeter: - Sensor: https://www.mouser.at/ProductDetail/Analog-Devices-Maxim-Integrated/MAX30101EFD%2BT?qs=sITqEBh490kEm6CNcTH1tQ%3D%3D&srsltid=AfmBOooeisLKsf-SlCmX0eI9FAGqsr9U439F-9ioyHP3WWO6gMZ4mlS4&utm_source=chatgpt.com -…
Main components on the Wearables-Project
Wearables-Project bill of materials (BOM)
22 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LTC3558EUD-TRPBF | QFN-20_UD_LIT | U1 |
| 1 | Battery | BT1 | |
| 1 | Thermistor_NTC | TH1 | |
| 1 | 5V Test | TP1 | |
| 1 | Akku Output | TP2 | |
| 1 | Spannungsteiler | TP3 | |
| 1 | 3,3V Test | TP4 | |
| 1 | Lädt? | TP5 | |
| 1 | 2.2µH | L1 | |
| 1 | 10µF | C2 | |
| 1 | 33pF | C3 | |
| 1 | 22µF | C4 | |
| 1 | 330pF | C5 | |
| 1 | 10pF | C6 | |
| 1 | 1µF | C7 | |
| 1 | 100k | R1 | |
| 1 | 220k | R2 | |
| 1 | 324k | R3 | |
| 1 | 121k | R4 | |
| 1 | 2.5k | R5 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 105k | R6 | |
| 1 | 15k | R7 |
Wearables-Project design files
The KiCad project lives in the Wearables-MGST-SS-2026/Wearables-Project repository on GitHub; these links point at the commit this page was built from.
Wearables-Project: common questions
How many components are on the Wearables-Project?
22 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Wearables-Project design files?
From the Wearables-MGST-SS-2026/Wearables-Project repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Wearables-Project design in my own project?
The repository has no license, so all rights stay with Wearables-MGST-SS-2026. Use it as a reference, and ask the author before reusing the design.
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2kChainlinkDriver
scottbez1
198.1 × 30.5 mm58 parts2LApache-2.04.2k