Applied elec
webertom6·applied-elec·final_kicad/pcb_applied.kicad_pcb
About the Applied elec PCB
Applied elec is an open source STM32 PCB design by webertom6, published on GitHub under the MIT license. It is a 2-layer board measuring 54.3 × 50.1 mm, with 40 components from 22 distinct parts.
Its main chip is the STM32, from the STM32 family. Other key parts include the DAC, VRM and AO. By type, the board carries 13 resistors, 11 capacitors, 4 ICs, 3 connectors, 3 switches and 2 transistors.
It belongs with the test & measurement designs in this gallery.
From the project
A compact signal generator (sinus, triangle, square) with tunable frequency project implemented in C with a custom PCB. This repo contains the firmware, PCB files and a project report describing the design, implementation and test results.
A compact signal generator (sinus, triangle, square) with tunable frequency project implemented in C with a custom PCB. This repo contains the firmware, PCB files and a project report describing the design, implementation and test results. ## What it is
This project generates configurable test signals for electronics development and lab use. It includes: - Firmware written in main.c that drives the signal generation functionality. - PCB design files in the finalkicad/ folder (schematic and PCB). - A project report (report.pdf`) with design notes, measurements and results. ## How it was made

Main components on the Applied elec
Applied elec bill of materials (BOM)
40 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32 | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | DAC | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | VRM | SOT-223 | U4 |
| 1 | AO | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 2 | IRLML0030 | SOT-23 | Q3, Q4 |
| 1 | Conn_PROG | PinHeader_1x05_P2.54mm_Horizontal | J1 |
| 1 | USB_Conn | USB_Micro-B_Amphenol_10104110_Horizontal | J2 |
| 1 | Conn_OUT | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J3 |
| 1 | SETTING_POT | Potentiometer_Bourns_TC33X_Vertical | RV1 |
| 1 | SIGNAL_SW | SW_PUSH_6mm | SW1 |
| 1 | RESET_SW | SW_PUSH_6mm | SW2 |
| 1 | SETTINGS_SW | SW_PUSH_6mm | SW3 |
| 1 | Thermistor_PTC | R_1206_3216Metric | TH1 |
| 1 | GND | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP1 |
| 1 | DAC | TestPoint_THTPad_D2.5mm_Drill1.2mm | TP2 |
| 7 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C4, C5, C9, C10, C11 |
| 4 | 10µ | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C6, C7, C8 |
| 1 | 560 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 7k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3 |
| 1 | 220 mais inutile | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 10k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R7, R9, R11 |
| 6 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R8, R10, R12, R13, R14 |
Applied elec design files
The KiCad project lives in the webertom6/applied-elec repository on GitHub; these links point at the commit this page was built from.
Applied elec: common questions
What microcontroller does the Applied elec use?
The Applied elec is built around the STM32, from the STM32 family.
How big is the Applied elec PCB?
The Applied elec measures 54.3 × 50.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Applied elec?
40 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Applied elec design files?
From the webertom6/applied-elec repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Applied elec design in my own project?
Yes, under the terms of its MIT license, which webertom6 chose for the repository.
Can I test firmware for the Applied elec without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k