Power
About the Power PCB
Power is an open source PCB design by westonb, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 21 components from 11 distinct parts.
By type, the board carries 7 connectors, 6 capacitors, 2 relays, 2 resistors, 1 fuse and 1 diode.
From the project
A compact qcw tesla coil system
Power bill of materials (BOM)
21 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | Conn_01x03_Female | Terminal-block-plug_3x1_5mm-pitch | J1001, J1003 |
| 1 | Conn_01x04_Female | Terminal-block-plug_4x1_3.5mm-pitch | J1002 |
| 4 | mounting-hole-nc | M3-mounting-hole-insulated | J1004, J1005, J1006, J1007 |
| 1 | Fuse | Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open | F1001 |
| 1 | EMI_Filter_CommonMode | 744824622 | FL1001 |
| 1 | Heatsink_Pad | RA-T2X | HS1001 |
| 2 | GTRL2 | G2RL-2 | K1001, K1002 |
| 1 | D_x2_Serial_KCA | TO-247-3_Vertical | D1001 |
| 2 | CP1 | CP_Radial_D25.0mm_P10.00mm_SnapIn | C1001, C1002 |
| 4 | C | C_Rect_L18.0mm_W8.0mm_P15.00mm_FKS3_FKP3 | C1003, C1004, C1005, C1006 |
| 2 | R | RESISTOR_CW010 | R1001, R1002 |
Power design files
The KiCad project lives in the westonb/cute-qcw repository on GitHub; these links point at the commit this page was built from.
Power: common questions
How big is the Power PCB?
The Power measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power?
21 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power design files?
From the westonb/cute-qcw repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Power design in my own project?
The repository has no license, so all rights stay with westonb. Use it as a reference, and ask the author before reusing the design.
