Din meter atm90e26
About the Din meter atm90e26 PCB
Din meter atm90e26 is an open source PCB design by whatnick, published on GitHub. It is a 2-layer board measuring 32 × 31.1 mm, with 48 components from 14 distinct parts.
By type, the board carries 24 capacitors, 10 resistors, 8 connectors, 2 modules, 2 crystals and 2 inductors.
From the project
Working directory for DIN rail ATM90E26 module
This is a 2 unit DIN-Rail size in width ATM90E26 based metering module with a host of nice features, designed for use with the DIN-Rail energy monitor modules system.
- PCI-X1 lower connector for interface with power and analog voltage/current signals. - x2 ATM90E26 energy monitor ASICs and associated crystals, RC filter networks. - Molex SPI bus and power pass-through upper connector. - Dense single-sided PCB with 0402 passives. - Test points and jumpers on the bottom to allow additional uses.
Din meter atm90e26 bill of materials (BOM)
48 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | ATM90E26_ATM90E26 | SSOP-28_5.3x10.2mm_Pitch0.65mm | M1, M2 |
| 2 | Crystal_Small | Crystal_SMD_5032-2pin_5.0x3.2mm | Y1, Y2 |
| 2 | USEL | GS3 | J1, J6 |
| 2 | MMD1 | GS3 | J2, J7 |
| 2 | MMD0 | GS3 | J3, J8 |
| 1 | CONN_02X18 | PCI-EXPRESS | J4 |
| 1 | CONN_01X10 | SHDR10W60P200_1X10_2150X400X335P | J5 |
| 1 | GND_SUP | L_0402 | L1 |
| 1 | 3V3_SUP | L_0402 | L2 |
| 4 | 10U 10u | C_0603 | C1, C4, C8, C11 |
| 6 | 100N 100n | C_0402 | C2, C3, C5, C9, C10, C12 |
| 4 | 20P 20p | C_0402 | C6, C7, C13, C14 |
| 10 | 33N 33n | C_0402 | C15, C16, C17, C18, C19, C20, C21, C22 +2 |
| 10 | 1K | R_0402 | R1, R2, R3, R4, R5, R6, R7, R8 +2 |
Din meter atm90e26 design files
The KiCad project lives in the whatnick/din_meter_atm90e26 repository on GitHub; these links point at the commit this page was built from.
Din meter atm90e26: common questions
How big is the Din meter atm90e26 PCB?
The Din meter atm90e26 measures 32 × 31.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Din meter atm90e26?
48 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Din meter atm90e26 design files?
From the whatnick/din_meter_atm90e26 repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Din meter atm90e26 design in my own project?
The repository has no license, so all rights stay with whatnick. Use it as a reference, and ask the author before reusing the design.