USB-C pololu
About the USB-C pololu PCB
USB-C pololu is an open source PCB design by wyolum, published on GitHub under the MIT license. It is a 2-layer board measuring 20.3 × 14 mm, with 6 components from 5 distinct parts.
By type, the board carries 4 connectors and 2 resistors.
From the project
Word Clock
/kicad will be the latest HW version. Earlier versions get sequentially numbered v0, v1 etc.
USB-C pololu bill of materials (BOM)
6 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | VBUS | Socket_Strip_Straight_1x02 | J1 |
| 1 | IO | Socket_Strip_Straight_1x06 | J2 |
| 1 | GND | Socket_Strip_Straight_1x02 | J3 |
| 1 | USB_C_Receptacle | USB_C_Receptacle_Amphenol_12401610E4-2A | P1 |
| 2 | 5k11 | R_0805 | R1, R2 |
USB-C pololu design files
The KiCad project lives in the wyolum/ClockIOT repository on GitHub; these links point at the commit this page was built from.
USB-C pololu: common questions
How big is the USB-C pololu PCB?
The USB-C pololu measures 20.3 × 14 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the USB-C pololu?
6 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the USB-C pololu design files?
From the wyolum/ClockIOT repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the USB-C pololu design in my own project?
Yes, under the terms of its MIT license, which wyolum chose for the repository.
