Hack PGH badge
wyolum·hack_PGH_badge·kicad/hack_badge.kicad_pcb
About the Hack PGH badge PCB
Hack PGH badge is an open source PCB design by wyolum, published on GitHub. It is a 2-layer board measuring 50.8 × 50.8 mm, with 16 components from 6 distinct parts.
Other key parts include the US1881EUA-AAA-000-BU. By type, the board carries 6 diodes, 4 resistors, 2 ICs, 2 battery holders and 2 capacitors.
It belongs with the wearables designs in this gallery.
From the project
Badge PCB kit for hackPGH
FEATURES 1. Four LED's with series current limit resistors 2. Two CR2032 Coin Batteries 3. Use slow fade multi-color LEDs, or all White LEDs or whatever you choose 5. The simple version is just battery, resistors and LEDs. 6. The fancy version is with two US1881 magnetic hall latch sensors - see notes in the schematic (PDF)
[CERN Open Hardware Licence v1.2 ]:http://www.ohwr.org/attachments/2388/cernohlv12.txt
Main components on the Hack PGH badge
Hack PGH badge bill of materials (BOM)
16 components, 6 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | US1881EUA-AAA-000-BU | TO92127P410H430-3_TSOT-23 | U1, U2 |
| 2 | 3V | BatteryHolder_Keystone_3002_1x2032 | BT1, BT2 |
| 2 | D_Schottky | D_SOD-123_DO-34_SOD68_P7.62mm_Horizontal | D1, D4 |
| 4 | LED | LED_D3.0mm_Dialight_598 | D2, D3, D5, D6 |
| 2 | 100NF 100nF | C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C2 |
| 4 | 2E2 | R_1206_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3, R4 |
Hack PGH badge design files
The KiCad project lives in the wyolum/hack_PGH_badge repository on GitHub; these links point at the commit this page was built from.
Hack PGH badge: common questions
How big is the Hack PGH badge PCB?
The Hack PGH badge measures 50.8 × 50.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Hack PGH badge?
16 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Hack PGH badge design files?
From the wyolum/hack_PGH_badge repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Hack PGH badge design in my own project?
The repository has no license, so all rights stay with wyolum. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2kChainlinkDriverTester
scottbez1
198.1 × 95.3 mm123 parts2LApache-2.04.2k