Detector rev2
About the Detector rev2 PCB
Detector rev2 is an open source PCB design by xecus, published on GitHub. It is a 2-layer board measuring 52.1 × 45.1 mm, with 52 components from 24 distinct parts.
Other key parts include the N-jfet_dual, LM6171D, LT6657BHMS8-5, LT1995 and DMMT3904. By type, the board carries 20 capacitors, 15 resistors, 7 ICs, 3 connectors and 3 test points.
Main components on the Detector rev2
Detector rev2 bill of materials (BOM)
52 components, 24 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | N-jfet_dual | SOT_25 | U1, U2 |
| 2 | LM6171D | SOIC-8_3.9x4.9mm_P1.27mm | U3, U4 |
| 1 | LT6657BHMS8-5 | MSOP-8_3x3mm_P0.65mm | U5 |
| 1 | LT1995 | MSOP-10_3x3mm_P0.5mm | U6 |
| 1 | DMMT3904 | SOT-363_SC-70-6 | U7 |
| 1 | Conn_01x03_Male | input | J1 |
| 1 | Conn_01x03_Male | JST-XH_S3B | J2 |
| 1 | Conn_Coaxial | SMA_Amphenol_132134_Vertical | J3 |
| 2 | EMI_Filter_LCL | EMI_Filter_2606 | FL1, FL2 |
| 1 | 100 | Potentiometer_Bourns_3269W_Vertical | RV1 |
| 1 | 4.75k | Potentiometer_Bourns_3269W_Vertical | RV2 |
| 3 | TestPoint | HK-1-G | TP1, TP2, TP3 |
| 3 | 5p | C_0603_1608Metric | C1, C2, C17 |
| 1 | 1u | C_0603_1608Metric | C3 |
| 2 | 10p | C_0603_1608Metric | C4, C5 |
| 10 | 0.1u | C_0603_1608Metric | C6, C7, C13, C14, C15, C19, C20, C21 +2 |
| 4 | 100u | C_Elec_5x5.8 | C9, C10, C11, C12 |
| 2 | 100M | R_0603_1608Metric | R1, R2 |
| 2 | 430 | R_0603_1608Metric | R3, R6 |
| 5 | 1k | R_0603_1608Metric | R4, R5, R7, R8, R10 |
Show 4 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 200 | R_0603_1608Metric | R9 |
| 1 | 20 | R_0603_1608Metric | R11 |
| 1 | 1.24k | R_0603_1608Metric | R12 |
| 3 | 50 | R_0603_1608Metric | R13, R14, R15 |
Detector rev2 design files
The KiCad project lives in the xecus/opensource-mri-project repository on GitHub; these links point at the commit this page was built from.
Detector rev2: common questions
How big is the Detector rev2 PCB?
The Detector rev2 measures 52.1 × 45.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Detector rev2?
52 components, from 24 distinct parts. The full bill of materials is listed on this page.
Where can I download the Detector rev2 design files?
From the xecus/opensource-mri-project repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Detector rev2 design in my own project?
The repository has no license, so all rights stay with xecus. Use it as a reference, and ask the author before reusing the design.
