WeAct-Adapter-5V
About the WeAct-Adapter-5V PCB
WeAct-Adapter-5V is an open source PCB design by xfa273, published on GitHub. It is a 2-layer board measuring 30 × 12.5 mm, with 4 components from 4 distinct parts.
By type, the board carries 2 test points, 1 relay and 1 switch.
From the project
WeAct Studio MiniDebugger から minir20 / F413 機体へ SWD、SWO、UART、5 V を接続する変換基板です。 既存の STLink-Adapter を基に、デバッガの 5 V 出力を手動で遮断できるスライドスイッチ SW1 を追加しています。
WeAct Studio MiniDebugger から minir20 / F413 機体へ SWD、SWO、UART、5 V を接続する変換基板です。 既存の STLink-Adapter を基に、デバッガの 5 V 出力を手動で遮断できるスライドスイッチ SW1 を追加しています。
- 5V 側: MiniDebugger の 5 V を機体コネクタ K1 pin 1 へ接続します。 - OFF 側: MiniDebugger の 5 V を機体から切り離します。SWD/UART/GND は接続されたままです。 - SW1 は UART-Adapter と同じ E-Switch EG1218（SPDT, On-On）を使用します。中央端子を機体 5 V、5V 側端子をデバッガ 5 V、OFF 側端子を未接続としています。
WeAct-Adapter-5V bill of materials (BOM)
4 components, 4 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 62201021121 Wurth Elektronik | 62201021121 | K1 |
| 1 | EG1218 EG1218S E-Switch | EG1218 | SW1 |
| 1 | — | 1X04 | TP1 |
| 1 | — | 1X03 | TP2 |
WeAct-Adapter-5V design files
The KiCad project lives in the xfa273/nightfall-fw repository on GitHub; these links point at the commit this page was built from.
WeAct-Adapter-5V: common questions
How big is the WeAct-Adapter-5V PCB?
The WeAct-Adapter-5V measures 30 × 12.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WeAct-Adapter-5V?
4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the WeAct-Adapter-5V design files?
From the xfa273/nightfall-fw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the WeAct-Adapter-5V design in my own project?
The repository has no license, so all rights stay with xfa273. Use it as a reference, and ask the author before reusing the design.
More boards in nightfall-fw
STM32HM Nightfall mini-2e v1
39 × 70 mm86 parts2LNo license5
HM Nightfall mini-2e Encoder-PCB-L v1
3.5 × 7 mm7 parts2LNo license5
HM Nightfall mini-2e Encoder-PCB-R v1
3.5 × 7 mm7 parts2LNo license5
UART-Adapter
30 × 12.5 mm4 parts2LNo license5
STLink-Adapter
30 × 12.5 mm3 parts2LNo license5