One button interface
yannidd·one-button-interface·pcb/kicad/one_button_interface.kicad_pcb
About the One button interface PCB
One button interface is an open source PCB design by yannidd, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 18 × 36 mm, with 11 components from 8 distinct parts.
Other key parts include the LD39015M33R and STM6600. By type, the board carries 5 capacitors, 2 ICs, 2 connectors, 1 switch and 1 resistor.
From the project
PCB layout and schematic and Arduino code for a single push-button interface that can be used to turn a device on/off as well as a user input to interact with the firmware on a microcontroller.
PCB layout and schematic and Arduino code for a single push-button interface that can be used to turn a device on/off as well as a user input to interact with the firmware on a microcontroller.
Reference | Quantity| Value | RS Stock No.| Vendor |- |- |- |- |- C1 C2 C3 C5 |4 |1uF |461-2708 |RS C4 |1 |0.1uF |264-4630 |RS H1 H2 H3 H4 |4 |MountingHole |~ J1 |1 |Conn01x02 |820-1494 |RS J6 |1 |Conn01x04 |360-6314 |RS R1 |1 |10K |182-9211 |RS SW1 |1 |PTS645SL50SMTR 92 LFS|135-9400 |RS U1 |1 |LD39015M33R |795-8965 |RS U2 |1 |STM6600 |189-2069 |RS

Main components on the One button interface
One button interface bill of materials (BOM)
11 components, 8 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LD39015M33R RS | SOT-23-5 | U1 |
| 1 | STM6600 RS | TDFN-12_2x3mm_P0.5mm | U2 |
| 1 | CONN_01X02 Conn_01x02_Male RS | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | CONN_01X04 Conn_01x04 RS | PinHeader_1x04_P2.54mm_Vertical | J6 |
| 1 | SW_MEC_5E RS | SW_SPST_PTS645 | SW1 |
| 4 | 1UF 1uF RS | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2, C3, C5 |
| 1 | 0.1UF 0.1uF RS | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 10K RS | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
One button interface design files
The KiCad project lives in the yannidd/one-button-interface repository on GitHub; these links point at the commit this page was built from.
One button interface: common questions
How big is the One button interface PCB?
The One button interface measures 18 × 36 mm, has 2 copper layers and is 1.6002 mm thick.
How many components are on the One button interface?
11 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the One button interface design files?
From the yannidd/one-button-interface repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the One button interface design in my own project?
Yes, under the terms of its GPL-3.0 license, which yannidd chose for the repository.