Board
zebreus·tom7misc·nand/board/board/board.kicad_pcb
About the Board
Board is an open source STM32 PCB design by zebreus, published on GitHub. It is a 2-layer board measuring 76.2 × 58.4 mm, with 40 components from 13 distinct parts.
Its main chip is the STM32F303RDTx, from the STM32 family. By type, the board carries 21 capacitors, 7 connectors, 3 ICs, 3 crystals, 3 switches and 3 resistors.
From the project
mirror of https://sourceforge.net/projects/tom7misc/
Main components on the Board
Board bill of materials (BOM)
40 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | STM32F303RDTx | LQFP-64_10x10mm_P0.5mm | U1, U2, U3 |
| 3 | 8 MHz | Crystal_HC49-U_Vertical | Y1, Y2, Y3 |
| 1 | Conn_01x13 | PinHeader_1x13_P2.54mm_Vertical | J1 |
| 1 | SWD1 | PinHeader_2x02_P2.54mm_Vertical | J2 |
| 1 | gnd | PinHeader_1x01_P2.54mm_Vertical | J3 |
| 1 | SWD3 | PinHeader_2x02_P2.54mm_Vertical | J4 |
| 1 | 3v3 | PinHeader_1x01_P2.54mm_Vertical | J5 |
| 1 | SWD2 | PinHeader_2x02_P2.54mm_Vertical | J6 |
| 1 | Raspberry_Pi_2_3 | PinHeader_2x20_P2.54mm_Vertical | J7 |
| 3 | PTS645SJH73LFS | PTS645SJH73LFS_FP | SW1, SW2, SW3 |
| 6 | 18pf | C_Disc_D6.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C15, C16 |
| 15 | .1uf | C_Disc_D6.0mm_W2.5mm_P5.00mm | C5, C6, C7, C8, C9, C10, C11, C12 +7 |
| 3 | 100k | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
Board design files
The KiCad project lives in the zebreus/tom7misc repository on GitHub; these links point at the commit this page was built from.
Board: common questions
What microcontroller does the Board use?
The Board is built around the STM32F303RDTx, from the STM32 family.
How big is the Board?
The Board measures 76.2 × 58.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Board?
40 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Board design files?
From the zebreus/tom7misc repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Board design in my own project?
The repository has no license, so all rights stay with zebreus. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in tom7misc
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k