TP Systemes microcontroleurs

ZHANGENSEA·TP_Systemes_microcontroleurs·Hardware/TP1/TP1.kicad_pcb

TP Systemes microcontroleurs PCB layout, top view — open source STM32 board by ZHANGENSEA

About the TP Systemes microcontroleurs PCB

TP Systemes microcontroleurs is an open source STM32 PCB design by ZHANGENSEA, published on GitHub. It is a 2-layer board measuring 58 × 47 mm, with 23 components from 18 distinct parts.

Its main chip is the STM32L021K4Tx, from the STM32 family. Other key parts include the BU33SD5WG-TR and MCP4801. By type, the board carries 10 capacitors, 4 connectors, 3 ICs, 3 resistors, 2 diodes and 1 inductor.

From the project

3DN

1.1.6 Activez l’USART2 en mode Asynchrone. Gardez les paramètres par défaut, et notez le baud rate.

1.2.13 Pourquoi PB9 est relié à la masse ?

PB9 n’est pas relié directement à la masse. Elle est reliée à la masse à travers une résistance pull down. Elle fonctionne comme une résistance de tirage (vers le bas). Son rôle est de s'assurer que la broche reste à un niveau logique bas (0V) lorsque rien n'est connecté à celle-ci ou si le dispositif connecté est en haute impédance. Cela évite que la broche flotte, ce qui pourrait mener à des états logiques indéfinis et à une consommation de courant…

Main components on the TP Systemes microcontroleurs

BU33SD5WG-TRSTM32L021K4TxMCP4801

TP Systemes microcontroleurs bill of materials (BOM)

23 components, 18 distinct parts.

QtyPartRefs
1
BU33SD5WG-TR
U1
1
STM32L021K4Tx
U2
1
MCP4801
U3
1
Conn_02x07_Odd_Even
J1
1
INPUT
J2
1
POWER
J3
1
OUTPUT
J4
1
ORANGE TLM01100_GSB
D1
1
LED
D2
1
39n
L1
1
4u7
C1
4
100n
C2, C3, C4, C9
1
1u
C5
1
10n
C6
2
1uF
C7, C8
1
10u
C10
2
1k
R1, R3
1
100k
R2

TP Systemes microcontroleurs design files

The KiCad project lives in the ZHANGENSEA/TP_Systemes_microcontroleurs repository on GitHub; these links point at the commit this page was built from.

TP Systemes microcontroleurs: common questions

What microcontroller does the TP Systemes microcontroleurs use?

The TP Systemes microcontroleurs is built around the STM32L021K4Tx, from the STM32 family.

How big is the TP Systemes microcontroleurs PCB?

The TP Systemes microcontroleurs measures 58 × 47 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the TP Systemes microcontroleurs?

23 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the TP Systemes microcontroleurs design files?

From the ZHANGENSEA/TP_Systemes_microcontroleurs repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the TP Systemes microcontroleurs design in my own project?

The repository has no license, so all rights stay with ZHANGENSEA. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the TP Systemes microcontroleurs without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards