Stm32c0-nano hw
znuh·stm32c0-nano-hw·kicad/stm32c0-nano.kicad_pcb
About the Stm32c0-nano hw PCB
Stm32c0-nano hw is an open source STM32 PCB design by znuh, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 17.8 × 43.2 mm, with 24 components from 14 distinct parts.
Its main chip is the STM32C071KBTx, from the STM32 family. Other key parts include the AP7313-33SRG. By type, the board carries 7 capacitors, 6 resistors, 5 diodes, 4 connectors and 2 ICs.
From the project
STM32C0-Nano Board Hardware Design Files
It is largely compatible to ATMega-based "Nano" boards - with 3.3V IOs:
Creative Commons Attribution/Share-Alike, all text above must be included in any redistribution. See license.txt for additional details.
Main components on the Stm32c0-nano hw
Stm32c0-nano hw bill of materials (BOM)
24 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32C071KBTx | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | AP7313-33SRG | SOT-23-3 | U2 |
| 1 | Conn_01x15 | PinHeader_1x15_P2.54mm_Vertical | J1 |
| 1 | Conn_01x15_16_30 | PinHeader_1x15_P2.54mm_Vertical_16_30 | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J3 |
| 1 | SWD | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | PMEG2010EH | D_SOD-123F | D1 |
| 1 | green | LED_0603_1608Metric | D2 |
| 1 | ESD5V3U2U | Infineon_PG-TSFP-3-1 | D3 |
| 1 | cyan | LED_0603_1608Metric | D4 |
| 1 | pink | LED_0603_1608Metric | D5 |
| 6 | 4.7uF/10V | C_0402_1005Metric | C1, C3, C4, C5, C6, C7 |
| 1 | 0.1uF | C_0402_1005Metric | C2 |
| 6 | 5.1k | R_0402_1005Metric | R1, R2, R3, R4, R5, R6 |
Stm32c0-nano hw design files
The KiCad project lives in the znuh/stm32c0-nano-hw repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/stm32c0-nano.kicad_pcb
- Schematickicad/stm32c0-nano.kicad_sch
Stm32c0-nano hw: common questions
What microcontroller does the Stm32c0-nano hw use?
The Stm32c0-nano hw is built around the STM32C071KBTx, from the STM32 family.
How big is the Stm32c0-nano hw PCB?
The Stm32c0-nano hw measures 17.8 × 43.2 mm, has 2 copper layers and is 1.579 mm thick.
How many components are on the Stm32c0-nano hw?
24 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Stm32c0-nano hw design files?
From the znuh/stm32c0-nano-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Stm32c0-nano hw design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which znuh chose for the repository.
Can I test firmware for the Stm32c0-nano hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k