PCBV1
About the PCBV1 PCB
PCBV1 is an open source STM32 PCB design by 0reoAurelien, published on GitHub. It is a 2-layer board measuring 38 × 40 mm, with 16 components from 11 distinct parts.
Its main chip is the STM32L412KBTx, from the STM32 family. By type, the board carries 5 connectors, 4 capacitors, 3 resistors, 2 diodes, 1 IC and 1 switch.
From the project
On dépose ici les documents concernant le projet
Un hovercraft (en français aéroglisseur) est un véhicule amphibie à portance aérostatique et à propulsion aérienne, qui en général possède une ou plusieurs hélices aériennes. La portance est assurée par un coussin d'air sous faible pression relative, entretenu par une soufflante à l'intérieur d'une enceinte dont les parois latérales, appelées jupes, sont suffisamment déformables pour suivre au plus près le relief de la surface survolée et ainsi réduire les fuites. Les aéroglisseurs se déplacent le plus souvent sur la mer, mais aussi sur toute surface terrestre ne présentant pas d'obstacles…
Main components on the PCBV1
PCBV1 bill of materials (BOM)
16 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32L412KBTx | LQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_02x07_Odd_Even | PinHeader_2x07_P1.27mm_Vertical_SMD | J1 |
| 2 | Conn_01x03 | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J2, J3 |
| 1 | Conn_01x08 | JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical | J4 |
| 1 | Conn_01x02 | JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical | J5 |
| 1 | SW_Push | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW1 |
| 2 | LED_Small | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | 4u7 | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 3 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4 |
| 2 | 1k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 100K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
PCBV1 design files
The KiCad project lives in the 0reoAurelien/projet-hovercraft repository on GitHub; these links point at the commit this page was built from.
PCBV1: common questions
What microcontroller does the PCBV1 use?
The PCBV1 is built around the STM32L412KBTx, from the STM32 family.
How big is the PCBV1 PCB?
The PCBV1 measures 38 × 40 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCBV1?
16 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCBV1 design files?
From the 0reoAurelien/projet-hovercraft repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCBV1 design in my own project?
The repository has no license, so all rights stay with 0reoAurelien. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PCBV1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in projet-hovercraft
Similar boards
STM32LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7k
STM32AxxSolder
AxxAxx
39 × 82.5 mm122 parts2LGPL-3.01.7k
STM32LibreVNA
jankae
122 × 98 mm592 parts6LGPL-3.01.6k
STM32AIOC
skuep
21 × 31.5 mm47 parts2LMIT1.4k
STM32Ferris
pierrechevalier83
208.8 × 86.8 mm102 parts2LSHL-2.11.3k
STM32176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2k