HardLabs

Schema alimentation

0reoAurelien·projet-hovercraft·Hardware/PCB2V0/PCB2SCHEMATIC2/Schema_alimentation.kicad_pcb

Schema alimentation PCB layout, top view — open source STM32 board by 0reoAurelien

About the Schema alimentation PCB

Schema alimentation is an open source STM32 PCB design by 0reoAurelien, published on GitHub. It is a 2-layer board measuring 48.3 × 48.3 mm, with 15 components from 10 distinct parts.

Its main chip is the STM32L412KBTx, from the STM32 family. Other key parts include the MPU-6050. By type, the board carries 5 capacitors, 3 diodes, 3 resistors, 2 ICs, 1 connector and 1 inductor.

From the project

On dépose ici les documents concernant le projet

Un hovercraft (en français aéroglisseur) est un véhicule amphibie à portance aérostatique et à propulsion aérienne, qui en général possède une ou plusieurs hélices aériennes. La portance est assurée par un coussin d'air sous faible pression relative, entretenu par une soufflante à l'intérieur d'une enceinte dont les parois latérales, appelées jupes, sont suffisamment déformables pour suivre au plus près le relief de la surface survolée et ainsi réduire les fuites. Les aéroglisseurs se déplacent le plus souvent sur la mer, mais aussi sur toute surface terrestre ne présentant pas d'obstacles…

Main components on the Schema alimentation

STM32L412KBTxMPU-6050

Schema alimentation bill of materials (BOM)

15 components, 10 distinct parts.

QtyPartRefs
1
STM32L412KBTx
U1
1
MPU-6050
U3
1
Conn_02x07_Odd_Even
J1
3
LED_Small
D1, D2, D3
1
39n
L1
1
4u7
C3
2
100n
C4, C5
1
1u
C6
1
10n
C7
3
1k
R1, R2, R3

Schema alimentation design files

The KiCad project lives in the 0reoAurelien/projet-hovercraft repository on GitHub; these links point at the commit this page was built from.

Schema alimentation: common questions

What microcontroller does the Schema alimentation use?

The Schema alimentation is built around the STM32L412KBTx, from the STM32 family.

How big is the Schema alimentation PCB?

The Schema alimentation measures 48.3 × 48.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Schema alimentation?

15 components, from 10 distinct parts. The full bill of materials is listed on this page.

Where can I download the Schema alimentation design files?

From the 0reoAurelien/projet-hovercraft repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Schema alimentation design in my own project?

The repository has no license, so all rights stay with 0reoAurelien. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Schema alimentation without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in projet-hovercraft

Similar boards