Cmd
0x007E·cmd·pcb/CMD.kicad_pcb
About the Cmd PCB
Cmd is an open source PCB design by 0x007E, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 37.6 × 53.3 mm, with 78 components from 9 distinct parts.
By type, the board carries 37 diodes, 37 capacitors, 2 connectors, 1 fuse and 1 resistor.
It belongs with the displays & leds designs in this gallery.
From the project
Color Matrix Display
The CMD is a board with a matrix of APA102 or any other SPI controllable RGB-LED. The board itself can be driven with a voltage from 3V3-5V and controlled over the APA102 driver library. An advanced option is to use the CMD driver library that is also used in the demo firmware in this repository.
The pcb is created with KiCAD, the housing with FreeCAD. All files are built with github actions so that they are ready for a production environment.

Cmd bill of materials (BOM)
78 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Conn_01x06_Pin | HARWIN_M20-8890645_Pin_Header | J1 |
| 1 | Conn_01x06_Socket | HARWIN_M20-7910642R_Pin_Socket | J2 |
| 1 | Fuse | Fuse_1206_3216Metric | F1 |
| 35 | APA102 | LED_RGB_5050-6 | D1, D2, D3, D4, D5, D6, D7, D8 +27 |
| 1 | BZV55B5V6 | D_MiniMELF | D36 |
| 1 | LED | LED_1206_3216Metric | D37 |
| 35 | 100n | C_1206_3216Metric | C1, C2, C3, C4, C5, C6, C7, C8 +27 |
| 2 | 10u | CP_EIA-6032-28_Kemet-C | C36, C37 |
| 1 | 180 | R_1206_3216Metric | R1 |
Cmd design files
The KiCad project lives in the 0x007E/cmd repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/CMD.kicad_pcb
- Schematicpcb/CMD.kicad_sch
Cmd: common questions
How big is the Cmd PCB?
The Cmd measures 37.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Cmd?
78 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the Cmd design files?
From the 0x007E/cmd repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Cmd design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k