4,342 open source boards in Displays & LEDs

OLED, LCD and e-paper drivers, LED matrices, addressable LEDs and nixie clocks. Every board here is a public GitHub project with its KiCad files, read for size, layers and parts. Pick one close to your design and simulate its firmware on HardLabs before you build it.

4,342 boardsClear filters|Most starred

Open source display and LED boards at a glance

The gallery holds 4342 open source display and LED boards from 2994 GitHub repositories; a typical one measures about 81.2 × 65.5 mm and carries around 34 components.

84% are two-layer designs, the rest use four layers or more, and 45% carry an open source license.

The most starred is View base by scottbez1.

Open source display and LED boards: common questions

Where can I find open source display and LED boards?

This page lists 4342, each read from its KiCad files on GitHub: board size, layers, the full parts list and a render of the PCB, with links to the original repository.

What parts are most common on display and LED boards?

The AMS1117-3.3, USBLC6-2SC6, MOUDLE-SEEEDUINO-XIAO, XIAO-RP2040-DIP and ER_OLEDM0.91_1x-I2C appear in the most repositories here.

Which microcontrollers do display and LED boards use?

Most are built on ESP32 (833), RP2040/RP2350 (607), AVR/Arduino (401) and STM32 (273).

How big is a typical display or LED board?

The median is 81.2 × 65.5 mm, and 84% are two-layer designs.

What is the most popular open source display or LED board?

By GitHub stars, View base by scottbez1, with 22,165 stars.

Can I simulate one of these display and LED boards before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part