Mgc stm32g4
0x007E·mgc_stm32g4·pcb/MGC_module.kicad_pcb
About the Mgc stm32g4 PCB
Mgc stm32g4 is an open source STM32 PCB design by 0x007E, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 33 × 48.9 mm, with 43 components from 15 distinct parts.
Its main chip is the STM32G491CETx, from the STM32 family. By type, the board carries 18 resistors, 14 capacitors, 5 connectors, 2 crystals, 1 IC and 1 battery holder.
It belongs with the displays & leds designs in this gallery.
From the project
MeGARCard - STM32G4 Module
The STM32G4 (mgcmodule) is an adaptable board for the MeGARCard. The board offers the possibility to control the MeGARCard with an STM32G4. The board itself is connected to the MeGARCard within the pcb-to-pcb connectors (no soldering necessary). With the onboard dip-switches the board voltage can be regulated from 3V3 to 5V. Also the usage of hardware-/software-twi` to control the SSD1306-display on the megacard can be selected.

Main components on the Mgc stm32g4
Mgc stm32g4 bill of materials (BOM)
43 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32G491CETx | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | 32.768kHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 12MHz | Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm | Y2 |
| 5 | 103P012BB100 | AMPHENOL_103P012BB100 | J3, J7, J11, J12, J13 |
| 1 | Battery_Cell | BatteryHolder_LINX_BAT-HLD-012-SMT | BT1 |
| 1 | BAT43 | D_MiniMELF | D1 |
| 1 | 10uH | L_1206_3216Metric | L1 |
| 1 | 100u | CP_EIA-3528-21_Kemet-B | C1 |
| 9 | 100n | C_1206_3216Metric | C2, C3, C4, C5, C6, C7, C8, C9 +1 |
| 4 | 10p | C_0603_1608Metric | C12, C13, C14, C15 |
| 1 | 1k | R_1206_3216Metric | R1 |
| 12 | 0R | R_1206_3216Metric | R2, R3, R4, R5, R6, R7, R8, R9 +4 |
| 1 | 150 | R_1206_3216Metric | R10 |
| 2 | 0R | R_0603_1608Metric | R11, R12 |
| 2 | 22k | R_1206_3216Metric | R14, R15 |
Mgc stm32g4 design files
The KiCad project lives in the 0x007E/mgc_stm32g4 repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/MGC_module.kicad_pcb
- Schematicpcb/MGC_module.kicad_sch
Mgc stm32g4: common questions
What microcontroller does the Mgc stm32g4 use?
The Mgc stm32g4 is built around the STM32G491CETx, from the STM32 family.
How big is the Mgc stm32g4 PCB?
The Mgc stm32g4 measures 33 × 48.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Mgc stm32g4?
43 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Mgc stm32g4 design files?
From the 0x007E/mgc_stm32g4 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Mgc stm32g4 design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.
Can I test firmware for the Mgc stm32g4 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k