Wfg
0x007E·wfg·pcb/WFG.kicad_pcb
About the Wfg PCB
Wfg is an open source PCB design by 0x007E, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 54.1 × 30.5 mm, with 22 components from 14 distinct parts.
Other key parts include the LM324. By type, the board carries 10 resistors, 4 capacitors, 2 connectors, 1 IC, 1 fuse and 1 diode.
From the project
Waveform Geneartor
The WFG is a board with an LM324 or any other 4-channel operational amplifier. The board itself is driven with a voltage of 5V. It generates a triange and a pwm signal. Both signals can be adjustet through the onboard trimmer. When the board is connected to a voltage source the green led signals the readiness.
Optional the generated signals can be readin with an external interrupt and a internal running timmer on a microcontroller and status data can be sent to a terminal over UART. A demo how this can be done is attached and can be tested with an ATmega16A.

Main components on the Wfg
Wfg bill of materials (BOM)
22 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM324 | SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04_Socket | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | 100m | Fuse_1206_3216Metric | F1 |
| 3 | 10k | Potentiometer_Bourns_3296W_Vertical | RV1, RV2, RV3 |
| 1 | Green | LED_1206_3216Metric | D1 |
| 1 | 100u | CP_Elec_6.3x4.9 | C1 |
| 2 | 100n | C_1206_3216Metric | C2, C3 |
| 1 | 1u | CP_EIA-3528-21_Kemet-B | C4 |
| 5 | 1k | R_1206_3216Metric | R1, R3, R4, R5, R10 |
| 1 | 4k7 | R_1206_3216Metric | R2 |
| 2 | 330 | R_1206_3216Metric | R6, R8 |
| 1 | 1Meg | R_1206_3216Metric | R7 |
| 1 | 270 | R_1206_3216Metric | R9 |
Wfg design files
The KiCad project lives in the 0x007E/wfg repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/WFG.kicad_pcb
- Schematicpcb/WFG.kicad_sch
Wfg: common questions
How big is the Wfg PCB?
The Wfg measures 54.1 × 30.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Wfg?
22 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Wfg design files?
From the 0x007E/wfg repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Wfg design in my own project?
It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.