HardLabs

Plate bottom

0xCB-dev·0xCB-Static·plate-bottom/plate-bottom.kicad_pcb

Plate bottom PCB layout, top view — open source board by 0xCB-dev

About the Plate bottom PCB

Plate bottom is an open source PCB design by 0xCB-dev, published on GitHub under the Custom license license. It is a 2-layer board measuring 238.6 × 111.5 mm, with 8 components from 1 distinct parts.

It belongs with the keyboards designs in this gallery.

From the project

40% Mechanical TH Keyboard

Licence | OSHWA :-------------------------:|:-------------------------: | [](https://certification.oshwa.org/de000114.html)

qmk clone cd qmkfirmware export LTO=Y To go to bootloader hold the ESC key while plugging in (or RESET switch, then hold the BOOT switch, release RESET, release BOOT). The board should now appear in lsusb (or device manager). make 0xcb/static:via:flash

Plate bottom, from the project README
From the project README

Plate bottom bill of materials (BOM)

8 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
8
MountingHole_Pad
H1, H2, H3, H4, H5, H6, H7, H8

Plate bottom design files

The KiCad project lives in the 0xCB-dev/0xCB-Static repository on GitHub; these links point at the commit this page was built from.

Plate bottom: common questions

How big is the Plate bottom PCB?

The Plate bottom measures 238.6 × 111.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Plate bottom?

8 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Plate bottom design files?

From the 0xCB-dev/0xCB-Static repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Plate bottom design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

More boards in 0xCB-Static

Similar boards