OBC

22619291·PocketQube·OBC - V3/OBC.kicad_pcb

OBC PCB layout, top view — open source STM32 board by 22619291

About the OBC PCB

OBC is an open source STM32 PCB design by 22619291, published on GitHub. It is a 4-layer board measuring 42 × 42 mm, with 89 components from 35 distinct parts.

Its main chip is the STM32H723VGT6, from the STM32 family. Other key parts include the LSM9DS1TR, OPA4330 and LTC2580HDD. By type, the board carries 35 capacitors, 32 resistors, 9 connectors, 7 ICs, 4 crystals and 2 diodes.

Main components on the OBC

STM32H723VGT6LSM9DS1TROPA4330LTC2580HDD

OBC bill of materials (BOM)

89 components, 35 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32H723VGT6
U1
1
LSM9DS1TR
U2
4
OPA4330
U3, U4, U6, U7
1
LTC2580HDD
U5
1
25 MHz
Y1
2
32.768 kHz
Y2, Y3
1
80 MHz
Y4
1
ESL_PQ_MainHeader
J1
1
Conn_01x04
J2
2
Conn_01x08_MountingPin
J3, J7
1
Conn_02x10_Counter_Clockwise
J4
1
Conn_02x10_Top_Bottom
J5
1
Micro_SD_Card
J6
1
Conn_01x05
J8
1
DF40C-50DS-0.4V(51)
P1
2
LED
D1, D2
2
8p
C1, C2
2
12p
C3, C4
1
10n
C5
11
100n
C6, C8, C12, C13, C17, C18, C19, C20 +3
Show 15 more
QtyPartRefs
5
100n
C7, C10, C24, C25, C29
4
10u
C9, C14, C16, C30
1
10n
C11
1
27p
C15
6
220p
C26, C31, C32, C33, C34, C35
2
2.2u
C27, C28
2
165
R1, R2
3
560
R3, R4, R5
4
0
R6, R18, R21, R22
6
470
R7, R8, R9, R10, R11, R12
7
4k7
R13, R27, R28, R29, R30, R31, R32
4
0
R14, R15, R25, R26
4
4k7
R16, R17, R19, R20
1
120k
R23
1
56
R24

OBC design files

The KiCad project lives in the 22619291/PocketQube repository on GitHub; these links point at the commit this page was built from.

OBC: common questions

What microcontroller does the OBC use?

The OBC is built around the STM32H723VGT6, from the STM32 family.

How big is the OBC PCB?

The OBC measures 42 × 42 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the OBC?

89 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the OBC design files?

From the 22619291/PocketQube repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the OBC design in my own project?

The repository has no license, so all rights stay with 22619291. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the OBC without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in PocketQube

Similar boards