V8

22619291·PocketQube·OBC - Old/V8.kicad_pcb

V8 PCB layout, top view — open source STM32 board by 22619291

About the V8 PCB

V8 is an open source STM32 PCB design by 22619291, published on GitHub. It is a 4-layer board measuring 42 × 42 mm, with 69 components from 24 distinct parts.

Its main chip is the STM32H723VGT6, from the STM32 family. Other key parts include the LSM9DS1TR, OPA4330 and LTC2580HDD. By type, the board carries 29 capacitors, 26 resistors, 7 connectors, 5 ICs and 2 crystals.

Main components on the V8

STM32H723VGT6LSM9DS1TROPA4330LTC2580HDD

V8 bill of materials (BOM)

69 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32H723VGT6
U1
1
LSM9DS1TR
U2
2
OPA4330
U3, U4
1
LTC2580HDD
U5
1
25 MHz
Y1
1
32.768 kHz
Y2
1
Micro_SD_Card
J1
1
Conn_01x04
J2
1
Conn_01x08_MountingPin
J3
1
Conn_01x04_MountingPin
J4
1
Conn_02x10_Top_Bottom
J5
1
Conn_01x05
J8
1
DF40C-50DS-0.4V(51)
P1
6
150p
C1, C2, C3, C4, C5, C6
13
100n
C7, C9, C10, C17, C18, C19, C20, C21 +5
3
10u
C8, C16, C26
1
10n
C11
2
2p
C12, C13
2
27p
C14, C15
2
2.2u
C27, C28
Show 4 more
QtyPartRefs
6
560
R1, R2, R3, R4, R5, R6
14
4k7
R7, R8, R9, R10, R11, R12, R16, R17 +6
5
0
R13, R14, R15, R25, R26
1
56
R24

V8 design files

The KiCad project lives in the 22619291/PocketQube repository on GitHub; these links point at the commit this page was built from.

V8: common questions

What microcontroller does the V8 use?

The V8 is built around the STM32H723VGT6, from the STM32 family.

How big is the V8 PCB?

The V8 measures 42 × 42 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the V8?

69 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the V8 design files?

From the 22619291/PocketQube repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the V8 design in my own project?

The repository has no license, so all rights stay with 22619291. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the V8 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in PocketQube

Similar boards