Yashkhanolkargit
30yashkhanolkar·yashkhanolkargit·EMG Signal Controlled Wheelchair Project/EMG_PCB/EMG/EMG.kicad_pcb
About the Yashkhanolkargit PCB
Yashkhanolkargit is an open source PCB design by 30yashkhanolkar, published on GitHub. It is a 2-layer board measuring 63 × 29 mm, with 19 components from 15 distinct parts.
Other key parts include the OP07 and Muscle Sensor V3. By type, the board carries 6 connectors, 4 ICs, 4 resistors, 1 diode and 1 capacitor.
Main components on the Yashkhanolkargit
Yashkhanolkargit bill of materials (BOM)
19 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | OP07 | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3 |
| 1 | Muscle Sensor V3 | Muscle Sensor V3 | U4 |
| 1 | Supply | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J1 |
| 1 | +Vcc | PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | -Vcc | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | EMG Input | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Amp_Output | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Output | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J6 |
| 1 | Gain | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 1 | Threshold | Potentiometer_Bourns_3296W_Vertical | RV2 |
| 1 | 820R | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | Rcomp1 |
| 1 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | 100u | CP_Radial_D8.0mm_P3.80mm | C1 |
| 2 | 1k | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R2, R3 |
| 2 | 10k | R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R4, R5 |
Yashkhanolkargit design files
The KiCad project lives in the 30yashkhanolkar/yashkhanolkargit repository on GitHub; these links point at the commit this page was built from.
Yashkhanolkargit: common questions
How big is the Yashkhanolkargit PCB?
The Yashkhanolkargit measures 63 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Yashkhanolkargit?
19 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Yashkhanolkargit design files?
From the 30yashkhanolkar/yashkhanolkargit repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Yashkhanolkargit design in my own project?
The repository has no license, so all rights stay with 30yashkhanolkar. Use it as a reference, and ask the author before reusing the design.