RC-Hotwheels
404boboo·RC-Hotwheels·KiCad-Files/rc_hotwheels.kicad_pcb
About the RC-Hotwheels PCB
RC-Hotwheels is an open source STM32 PCB design by 404boboo, published on GitHub. It is a 2-layer board measuring 29.5 × 21.6 mm, with 15 components from 13 distinct parts.
Its main chip is the STM32F070F6P6, from the STM32 family. Other key parts include the BD6211F-E2, MIC5504-3.3YM5-TR and HM-BT4502. By type, the board carries 6 capacitors, 4 ICs, 2 switches, 1 module and 1 battery holder.
Main components on the RC-Hotwheels
RC-Hotwheels bill of materials (BOM)
15 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BD6211F-E2 | SOIC127P620X171-8N | IC1 |
| 1 | MIC5504-3.3YM5-TR | SOT95P280X145-5N | IC2 |
| 1 | STM32F070F6P6 | SOP65P640X120-20N | U1 |
| 1 | HM-BT4502 | nRF24L01_Breakout | U3 |
| 1 | Motor_Connection | Motor_Connection | M1 |
| 1 | Battery_Cell | Battery_Pads | BT1 |
| 1 | OS102011MS2QN1 | OS102011MA1QN1 | S1 |
| 1 | OS102011MS2QN1 Li-Ion 18650 battery charging | Battery_Pads | S3 |
| 1 | Motor_Servo | Servo_Motor | SM1 |
| 3 | 885012209003 1uF | CAPC2012X135N | C1, C2, C4 |
| 1 | 885012209004 4.7uF | CAPC2012X135N | C3 |
| 1 | 885012209041 100nF | CAPC2012X135N | C5 |
| 1 | 885012209035 10nF | CAPC2012X135N | C6 |
RC-Hotwheels design files
The KiCad project lives in the 404boboo/RC-Hotwheels repository on GitHub; these links point at the commit this page was built from.
RC-Hotwheels: common questions
What microcontroller does the RC-Hotwheels use?
The RC-Hotwheels is built around the STM32F070F6P6, from the STM32 family.
How big is the RC-Hotwheels PCB?
The RC-Hotwheels measures 29.5 × 21.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the RC-Hotwheels?
15 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the RC-Hotwheels design files?
From the 404boboo/RC-Hotwheels repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the RC-Hotwheels design in my own project?
The repository has no license, so all rights stay with 404boboo. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the RC-Hotwheels without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k