33 open source boards using the MIC5504-3.3YM5-TR
Real designs built with the MIC5504-3.3YM5-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Ss main board
loopj
62.1 × 83.8 mm63 parts4LSHL-2.1802MCL86jr
MicroCoreLabs
56.1 × 57.1 mm66 parts4LNo license532FPGA
TinyFPGA-BX
tinyfpga
17.8 × 35.6 mm41 parts4LCERN-OHL-1.2302Debugotron - USB Switch
alvarop
60 × 60 mm72 parts4LBSD-3-Clause52Microchip SAM
Nigun
raziele
54 × 50.1 mm150 partsNo license40RP2040/RP2350
SWD2USBC Sample Target
alvarop
51.8 × 20 mm47 parts4LCC0-1.029STM32
VCU
formulaslug
92.5 × 101.6 mm202 parts4LNo license7Tycho
greatscottgadgets
90.9 × 100 mm164 parts4LCERN-OHL-P-2.07FPGA
Output.panel 3x3
Roboy
217 × 139 mm129 parts4LBSD-3-Clause4GD32
Big macro pad
obra
171.6 × 152.4 mm175 parts2LNo license3RP2040/RP2350
Andotrope
Victor-Field
60 × 59.3 mm30 parts2LNo license2AVR/Arduino
Stepper driver
harp-tech
124.4 × 80.4 mm207 parts4LCustom license1RP2040/RP2350
Flight controller atlas
williamjroche
51 × 45 mm66 parts4LMIT1WPT-01-TRANSMITTER
SasataniLab
70 × 85 mm185 parts4LAGPL-3.00STM32
Ecardz-Controller
mte-capstone-ecards
189 × 115 mm162 parts4LNo license0FPGA
FPGA Logic Analyzer
hack-a-tack
89.7 × 82.9 mm144 parts4LNo license0STM32
Keyboard stm32
Jonkaphi
168.3 × 125.7 mm141 parts4LMIT0ESP32
Mini car
jegor377
65 × 65 mm85 parts4LNo license0FPGA
DeepLearningProject
KourFrost
17.8 × 35.6 mm41 parts4LNo license0ESP32
Open-Source-Temperature-Sensor-ESP32-C6
IN4148
30 × 28 mm22 parts2LNo license0STM32
RC-Hotwheels
404boboo
29.5 × 21.6 mm15 parts2LNo license0STM32
Debugotron - SWD Sample Target
alvarop
39.7 × 14 mm30 parts2LBSD-3-Clause52Microchip SAM
Nigun 0603
raziele
101.6 × 50.8 mm146 parts2LNo license40RP2040/RP2350
SWD2USBC Sample Target (Basic)
alvarop
43 × 20 mm36 parts2LCC0-1.029STM32
TBB
formulaslug
139.7 × 63.5 mm159 parts4LNo license7FPGA
Panel 3x3
Roboy
217 × 139 mm129 parts4LBSD-3-Clause4FPGA
TinyFPGA-BX
hbrc-fpga-class
17.8 × 35.6 mm41 parts4LNo license3STM32
Keyboard stm32 with copper pour
Jonkaphi
168.3 × 122.5 mm133 parts4LMIT0Rov usb
samnadol
55.5 × 68.5 mm133 parts4LNo license0STM32
Steering wheel
formulaslug
106.4 × 142 mm63 parts2LNo license7FPGA
Board
Roboy
65 × 39 mm128 parts4LBSD-3-Clause4STM32
FS-4 Charging Board
formulaslug
55.3 × 95.6 mm59 parts2LNo license7STM32
Stm32-test
formulaslug
48.3 × 25.4 mm33 parts4LNo license7
How designs wire the MIC5504-3.3YM5-TR
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the MIC5504-3.3YM5-TR connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 21 of 22 designs, most often 1 µF (then 10 µF).
- The VOUT pin has a decoupling capacitor on 21 of 22 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 64% · a signal 36% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| NCpin 4 | Connected to: Not connected 86% | — |
| VOUTpin 5 | Connected to: 3.3V 77% · a signal 23% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ss main board by loopj, MCL86jr by MicroCoreLabs, TinyFPGA-BX by tinyfpga and Debugotron - SWD Sample Target by alvarop.
The MIC5504-3.3YM5-TR in open source designs
The gallery holds 33 open source boards using the MIC5504-3.3YM5-TR from 23 GitHub repositories; a typical one measures about 62.1 × 63.5 mm and carries around 85 components.
72% use four copper layers or more, and 39% carry an open source license.
The most starred is Ss main board by loopj.
Parts used alongside the MIC5504-3.3YM5-TR
Microcontrollers on boards using the MIC5504-3.3YM5-TR
What boards using the MIC5504-3.3YM5-TR are built for
MIC5504-3.3YM5-TR: common questions
Where can I find a MIC5504-3.3YM5-TR reference design?
Each of the 33 boards on this page is a real design using the MIC5504-3.3YM5-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the MIC5504-3.3YM5-TR VIN pin?
The VIN pin has a decoupling capacitor on 21 of 22 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 22 open source designs using the MIC5504-3.3YM5-TR.
What decoupling capacitors do designs use on the MIC5504-3.3YM5-TR VOUT pin?
The VOUT pin has a decoupling capacitor on 21 of 22 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 22 open source designs using the MIC5504-3.3YM5-TR.
What parts are used alongside the MIC5504-3.3YM5-TR?
The AT25SF081-SSHD-B, DSC6001CI2A-016.0000T, iCE40-LP8K-CM81, MIC5365-1.2YC5-TR and USBLC6-2SC6 appear in the most repositories here.
Which microcontrollers do boards using the MIC5504-3.3YM5-TR use?
Most are built on STM32 (10), FPGA (7), RP2040/RP2350 (4) and ESP32 (2).
How big is a typical board using the MIC5504-3.3YM5-TR?
The median is 62.1 × 63.5 mm, and 28% are two-layer designs.
What is the most popular open source board using the MIC5504-3.3YM5-TR?
By GitHub stars, Ss main board by loopj, with 802 stars.
Can I simulate one of these boards using the MIC5504-3.3YM5-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.