SofleKeyboard
435vic·BoringSofle
About the SofleKeyboard PCB
SofleKeyboard is an open source PCB design by 435vic, published on GitHub under the MIT license. It is a 2-layer board measuring 143.8 × 111.9 mm, with 84 components from 14 distinct parts.
Other key parts include the ProMicro. By type, the board carries 30 diodes, 29 switches, 10 jumpers, 1 IC and 1 connector.
It belongs with the keyboards and iot & wireless designs in this gallery.
From the project
A wireless sofle keyboard with choc switches
Main components on the SofleKeyboard
SofleKeyboard bill of materials (BOM)
84 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | ProMicro | U1 |
| 1 | OLED | OLED_NICEVIEW_COMBO_HDR_5Pin | J3 |
| 1 | RotaryEncoder | RotaryEncoder_Alps_EC12E_Vertical_H20mm | ENC1 |
| 10 | Jumper_NO_Small | Jumper_small | JP0, JP1, JP2, JP3, JP4, JP5, JP6, JP7 +2 |
| 1 | Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_DoubleSided | JST_BATT1 |
| 1 | SW_RST | Panasonic_EVQPUL_EVQPUC | RSW1 |
| 4 | SW_PUSH_LED | Choc_Hotswap_BiggerHSPads_Column1 | SW1, SW7, SW13, SW19 |
| 25 | SW_PUSH_LED | Choc_Hotswap_BiggerHSPads | SW2, SW3, SW4, SW5, SW6, SW8, SW9, SW10 +17 |
| 2 | SW_SPST | SW_SPDT_PCM12 | SW_BATT+1, SW_BATT+2 |
| 1 | SW_NAV | NavSwitch_5Way | SW_NAV_1 |
| 2 | HOLE | M2_HOLE_PCB | TH1, TH2 |
| 5 | HOLE | HOLE_M2_TH | TH3, TH4, TH5, TH6, TH7 |
| 29 | D | crkbd-diode | D1, D2, D3, D4, D5, D6, D7, D8 +21 |
| 1 | 1N4148W | D_SOD-123 | D25 |
SofleKeyboard design files
The KiCad project lives in the 435vic/BoringSofle repository on GitHub; these links point at the commit this page was built from.
- LayoutSofleKeyboard.kicad_pcb
- SchematicSofleKeyboard.kicad_sch
SofleKeyboard: common questions
How big is the SofleKeyboard PCB?
The SofleKeyboard measures 143.8 × 111.9 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SofleKeyboard?
84 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the SofleKeyboard design files?
From the 435vic/BoringSofle repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the SofleKeyboard design in my own project?
Yes, under the terms of its MIT license, which 435vic chose for the repository.