Teclado46

4ctu4l·teclado46

Teclado46 PCB layout, top view — open source STM32 board by 4ctu4l

About the Teclado46 PCB

Teclado46 is an open source STM32 PCB design by 4ctu4l, published on GitHub. It is a 2-layer board measuring 232.6 × 80.2 mm, with 160 components from 14 distinct parts.

Its main chip is the STM32G0B1CBTX, from the STM32 family. Other key parts include the XC6206PXXXMR. By type, the board carries 46 LEDs, 46 diodes, 11 capacitors, 3 resistors, 2 ICs and 2 connectors.

Main components on the Teclado46

Teclado46 bill of materials (BOM)

160 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
XC6206PXXXMR
XC6206PxxxMR
U1
1
STM32G0B1CBTX
STM32G0B1CBTx
U2
1
78171-0004
MOLEX
J1
1
CONN_01X05
Conn_01x05
J2
2
C720477
SW_SPST
BOOT1, RST1
46
MX_SW_HS
MX1, MX2, MX3, MX4, MX5, MX6, MX7, MX8 +38
2
MX_stab
S1, S2
24
MX_SK6812MINI-E
LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8 +16
22
MX_SK6812MINI-E
LED13, LED14, LED15, LED16, LED17, LED18, LED19, LED20 +14
46
1N4148W
D1, D2, D3, D4, D5, D6, D7, D8 +38
2
4.7U
4.7u
C1, C4
7
100N
100n
C2, C3, C7, C8, C9, C10, C11
2
1u
C5, C6
3
5.1K
5.1k
R1, R2, R3

Teclado46 design files

The KiCad project lives in the 4ctu4l/teclado46 repository on GitHub; these links point at the commit this page was built from.

Teclado46: common questions

What microcontroller does the Teclado46 use?

The Teclado46 is built around the STM32G0B1CBTX, from the STM32 family.

How big is the Teclado46 PCB?

The Teclado46 measures 232.6 × 80.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Teclado46?

160 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Teclado46 design files?

From the 4ctu4l/teclado46 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Teclado46 design in my own project?

The repository has no license, so all rights stay with 4ctu4l. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Teclado46 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards