192 open source boards using the XC6206PXXXMR
Real designs built with the XC6206PXXXMR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Djinn
tzarc
192.3 × 150.5 mm216 parts2LCERN-OHL-S-2.0991STM32
Huvud
bondus
42 × 42 mm116 parts4LGPL-3.0373RP2040/RP2350
Key ripper
bschwind
285.8 × 116.7 mm211 parts2LApache-2.0288XassetteAsterisk
SdtElectronics
56 × 56 mm137 parts2LCERN-OHL-W-2.0229STM32
Tako
ssbb
230.7 × 97.8 mm76 parts4LMIT197STM32
EF-S-Adapter
Jana-Marie
65 × 65 mm38 parts2LMIT138RP2040/RP2350
SST60HS
dededecline
284.7 × 94.2 mm160 parts2LGPL-3.0107RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105STM32
Hair electrolysis machine usb c
zoemaestra
53 × 53 mm75 parts2LCERN-OHL-P-2.089STM32
Unicorn
yanghu
268.2 × 110.5 mm142 parts2LMIT63RP2040/RP2350
Sweep
waffle87
216.9 × 86.9 mm208 parts2LSHL-2.157RP2040/RP2350
Hotswap
dededecline
288.9 × 98.4 mm160 parts2LGPL-3.048STM32
Mx unsaver main
nearestexit
391.8 × 105.4 mm229 parts2LMIT40RP2040/RP2350
Quacken
Nuclear-Squid
262 × 113.9 mm44 parts2LGPL-3.038RISC-V
Comu
cheyao
9.4 × 13 mm9 parts2LSHL-2.132STM32
Otterlinear keyboard
Jana-Marie
214 × 84 mm136 parts2LNo license22RP2040/RP2350
SST80
dededecline
344.7 × 124.1 mm152 parts2LGPL-3.021RP2040/RP2350
Memoria
shinkaimayano
242.9 × 96.8 mm145 parts2LMIT20STM32
Perdican
Gabouin
37.1 × 39.5 mm35 parts2LMIT19RP2040/RP2350
Monorail Diesel Reduced
KiserDesigns
242.9 × 95.3 mm188 parts2LNo license18RP2040/RP2350
Yak40 main
kuriki-sasa
285 × 93.5 mm133 parts2LCustom license18STM32
Bonk
arko9699
155.5 × 2 mm71 parts2LGPL-3.018RP2040/RP2350
Raii
unspecworks
236.9 × 86.9 mm208 parts2LSHL-2.117STM32
AlcatelLeft
nearestexit
278.7 × 117.2 mm109 parts2LMIT16STM32
Travaulta WKL
calvin-mcd
208.3 × 75.8 mm46 parts4LCC-BY-NC-4.016HPM6P41 BB
Alipay1
100 × 80.3 mm276 parts4LMIT14STM32
SMDU
sabanekko3
77.6 × 30.1 mm81 parts4LNo license13UINIO-Monitor
uinika
100 × 77.9 mm63 parts2LNo license12STM32
Scoms tacnpr
partio-scout
99.1 × 99.1 mm279 parts4LTAPR-OHL-1.09RP2040/RP2350
Pi60 RGB v2.0 usb
1upkeyboards
285 × 94.6 mm255 parts2LCC-BY-NC-4.08RP2040/RP2350
PH-AC
ph-design
200 × 100 mm59 parts2LCustom license7RP2040/RP2350
T80-5000-right
nearestexit
210.4 × 161.9 mm115 parts2LNo license6STM32
Fly ESC with stm32F051
fademike
19.4 × 21 mm49 parts2LNo license6A1200FaStRamExpansion
f1ac0
69.9 × 100 mm23 parts2LNo license6RP2040/RP2350
Fortyeighty
arrowtype
274.6 × 79.4 mm143 parts2LMIT5ESP32
Epaper breakout
jifanchn
100 × 45 mm98 parts4LNo license5
How designs wire the XC6206PXXXMR
Read from the KiCad layouts of 149 open source designs, one per repository: what each pin of the XC6206PXXXMR connects to, and the resistors, capacitors and other passives placed on it.
- The VI pin has a decoupling capacitor on 132 of 149 designs, most often 1 µF (then 10 µF).
- The VO pin has a decoupling capacitor on 128 of 149 designs, most often 1 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 92% | — |
| VOpin 2 | Connected to: 3.3V 87% |
|
| VIpin 3 | Connected to: 5V 82% · a signal 17% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Djinn by tzarc, Huvud by bondus, Key ripper by bschwind and XassetteAsterisk by SdtElectronics.
The XC6206PXXXMR in open source designs
The gallery holds 192 open source boards using the XC6206PXXXMR from 149 GitHub repositories; a typical one measures about 100 × 80.6 mm and carries around 104 components.
76% are two-layer designs, the rest use four layers or more, and 39% carry an open source license.
The most starred is Djinn by tzarc.
Parts used alongside the XC6206PXXXMR
Microcontrollers on boards using the XC6206PXXXMR
What boards using the XC6206PXXXMR are built for
XC6206PXXXMR: common questions
Where can I find a XC6206PXXXMR reference design?
Each of the 192 boards on this page is a real design using the XC6206PXXXMR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the XC6206PXXXMR VI pin?
The VI pin has a decoupling capacitor on 132 of 149 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 149 open source designs using the XC6206PXXXMR.
What decoupling capacitors do designs use on the XC6206PXXXMR VO pin?
The VO pin has a decoupling capacitor on 128 of 149 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 149 open source designs using the XC6206PXXXMR.
What parts are used alongside the XC6206PXXXMR?
The W25Q128JVS, RP2040, SRV05-4, USBLC6-2SC6 and 74AHCT1G125 appear in the most repositories here.
Which microcontrollers do boards using the XC6206PXXXMR use?
Most are built on STM32 (74), RP2040/RP2350 (46), Nordic nRF (14) and ESP32 (11).
How big is a typical board using the XC6206PXXXMR?
The median is 100 × 80.6 mm, and 76% are two-layer designs.
What is the most popular open source board using the XC6206PXXXMR?
By GitHub stars, Djinn by tzarc, with 991 stars.
Can I simulate one of these boards using the XC6206PXXXMR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.