Knx temperature monitor
4ilo·knx-temperature-monitor·pcb_v1.1/pcb.kicad_pcb
About the Knx temperature monitor PCB
Knx temperature monitor is an open source STM32 PCB design by 4ilo, published on GitHub under the MIT license. It is a 2-layer board measuring 80 × 62 mm, with 33 components from 14 distinct parts.
Its main chip is the STM32F072C8Tx, from the STM32 family. Other key parts include the MAX31865, LM7805_TO220, DS1307Z+ and KIMaip. By type, the board carries 13 capacitors, 9 resistors, 5 ICs, 2 connectors, 1 module and 1 crystal.
It belongs with the sensors designs in this gallery.
From the project
Custom Pt100 temperature probe interface to KNX.
Custom Pt100 temperature probe interface to KNX.
This module will be used to monitor my pool temperature, and generate alarms if the pump, water treatement or the pool heating stops.
Main components on the Knx temperature monitor
Knx temperature monitor bill of materials (BOM)
33 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F072C8Tx | LQFP-48_7x7mm_P0.5mm | U1 |
| 2 | MAX31865 | SSOP-20_5.3x7.2mm_P0.65mm | U2, U6 |
| 1 | LM7805_TO220 | TO-220-3_Vertical | U3 |
| 1 | DS1307Z+ | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | KIMaip | KIMaip | A1 |
| 1 | 32.768kHz | Crystal_SMD_SeikoEpson_MC306-4Pin_8.0x3.2mm_HandSoldering | X1 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_MetzConnect_Type055_RT01502HDWU_1x02_P5.00mm_Horizontal | J4, J5 |
| 1 | 24v | TerminalBlock_MetzConnect_Type055_RT01502HDWU_1x02_P5.00mm_Horizontal | 24V |
| 1 | SW_Push_Dual | SW_PUSH_6mm | SW1 |
| 12 | 0.1uf | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2, C3, C4, C5, C8, C9, C10 +4 |
| 1 | 0.33uf | C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6 |
| 1 | 10k | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 6 | 4k7 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2, R3, R5, R6, R7, R8 |
| 2 | 420 | R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4, R9 |
Knx temperature monitor design files
The KiCad project lives in the 4ilo/knx-temperature-monitor repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb_v1.1/pcb.kicad_pcb
Knx temperature monitor: common questions
What microcontroller does the Knx temperature monitor use?
The Knx temperature monitor is built around the STM32F072C8Tx, from the STM32 family.
How big is the Knx temperature monitor PCB?
The Knx temperature monitor measures 80 × 62 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Knx temperature monitor?
33 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Knx temperature monitor design files?
From the 4ilo/knx-temperature-monitor repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the Knx temperature monitor design in my own project?
Yes, under the terms of its MIT license, which 4ilo chose for the repository.
Can I test firmware for the Knx temperature monitor without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k