12 open source boards using the MAX31865

Real designs built with the MAX31865, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the MAX31865

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the MAX31865 connects to, and the resistors, capacitors and other passives placed on it.

  • The ISENSOR pin has a series resistor on 9 of 9 designs, most often 430 Ω (then 420 Ω).
  • The FORCE+ pin has a series resistor on 6 of 9 designs, most often 420 Ω (then 402 kΩ).
  • The FORCE2 pin has a series resistor on 6 of 9 designs, most often 420 Ω (then 402 kΩ).
  • The RTDIN+ pin has a series resistor on 6 of 9 designs, most often 420 Ω (then 402 kΩ).
BIASpin 1Connected to: The microcontroller 33% · not connected 22%
  • Series resistor on 44% · 430 Ω (2), 470 Ω (1)
REFIN+pin 2Connected to: 3.3V 67% · a signal 33%
REFIN-pin 3Connected to: 3.3V 67% · a signal 33%
ISENSORpin 4Connected to: Signal 100%
  • Series resistor on 100% · 430 Ω (2), 420 Ω (1), 402 kΩ (1)
FORCE+pin 5Connected to: A connector 22%
  • Series resistor on 67% · 420 Ω (1), 402 kΩ (1)
FORCE2pin 6Connected to: Signal 100%
  • Series resistor on 67% · 420 Ω (1), 402 kΩ (1)
RTDIN+pin 7Connected to: A connector 22%
  • Series resistor on 67% · 420 Ω (1), 402 kΩ (1)
  • Series capacitor on 33% · 100 nF (3)
RTDIN-pin 8Connected to: A connector 67%
  • Series capacitor on 33% · 100 nF (3)
AGNDpin 10Connected to: A connector 33% · GND 33%
  • Series capacitor on 67% · 100 nF (3), 1 µF (2)
SDIpin 11Connected to: A connector 44%
  • Series capacitor on 67% · 100 nF (3), 1 µF (2)
CSpin 13Connected to: GND 67% · a signal 33%
ANGDpin 16Connected to: The microcontroller 56% · GND 33%
  • Pull-up to 3.3V on 44% · 3.3 kΩ (2), 10 kΩ (1)
DRDYpin 18Connected to: GND 67% · a signal 22%
DVDDpin 19Connected to: GND 67% · VDD 33%
VDDpin 20Connected to: Not connected 67% · a signal 22%
  • Capacitor to GND on 33% · 100 nF (4)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include IoT WA - RTD by RWTH-EBC, Knx temperature monitor by 4ilo, TemperatureManagementGUI by KozaMateusz and IoT AIO by N5GEH.

The MAX31865 in open source designs

The gallery holds 12 open source boards using the MAX31865 from 9 GitHub repositories; a typical one measures about 89.8 × 55.5 mm and carries around 58 components.

64% are two-layer designs, the rest use four layers or more, and 42% carry an open source license.

The most starred is IoT WA - RTD by RWTH-EBC.

Microcontrollers on boards using the MAX31865

MAX31865: common questions

Where can I find a MAX31865 reference design?

Each of the 12 boards on this page is a real design using the MAX31865. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MAX31865 ISENSOR pin?

The ISENSOR pin has a series resistor on 9 of 9 designs, most often 430 Ω (then 420 Ω). Counted from the KiCad layouts of 9 open source designs using the MAX31865.

What resistor goes on the MAX31865 FORCE+ pin?

The FORCE+ pin has a series resistor on 6 of 9 designs, most often 420 Ω (then 402 kΩ). Counted from the KiCad layouts of 9 open source designs using the MAX31865.

What resistor goes on the MAX31865 FORCE2 pin?

The FORCE2 pin has a series resistor on 6 of 9 designs, most often 420 Ω (then 402 kΩ). Counted from the KiCad layouts of 9 open source designs using the MAX31865.

Which microcontrollers do boards using the MAX31865 use?

Most are built on STM32 (3), AVR/Arduino (1), ESP32 (1) and Raspberry Pi (1).

How big is a typical board using the MAX31865?

The median is 89.8 × 55.5 mm, and 64% are two-layer designs.

What is the most popular open source board using the MAX31865?

By GitHub stars, IoT WA - RTD by RWTH-EBC, with 3 stars.

Can I simulate one of these boards using the MAX31865 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part