Xineos1511LVDS-PleoraPT1000
7824c5a4·Xineos1511LVDS-PleoraPT1000
About the Xineos1511LVDS-PleoraPT1000 PCB
Xineos1511LVDS-PleoraPT1000 is an open source PCB design by 7824c5a4, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 82.8 × 99.5 mm, with 14 components from 12 distinct parts.
Other key parts include the MAX3221. By type, the board carries 5 capacitors, 4 connectors, 2 resistors, 1 IC, 1 transistor and 1 diode.
From the project
A PCB to allow the LVDS version of the Teledyne Dalsa Xineos-1511 X-Ray detector panel over GigE Vision via the Pleora PT1000 frame grabber
This circuit maps the IO (LVDS and UART) of the Teledyne Dalsa Xineos-1511 CMOS detector panel to the Pleora iPORT PT1000-LV frame grabber, allowing the LVDS version of the Dalsa detector with its antiquated 68 pin VHDCI connector to be used as a more accessible GigE sensor without losing key functionality. The PCB features a UART to RS-232 level translator based on the MAX3221, as the Xineos is controlled by TTL-level serial and the PT1000 communicates at RS-232 levels.

Main components on the Xineos1511LVDS-PleoraPT1000
Xineos1511LVDS-PleoraPT1000 bill of materials (BOM)
14 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MAX3221 | SSOP-16_5.3x6.2mm_P0.65mm | U1 |
| 1 | 2N3904 | TO-92L_Inline_Wide | Q1 |
| 1 | VIN | MSTB-5.0mm-x2 | J1 |
| 1 | 68_Pin_VHDCI_Xineos | VHDCI_68 | J2 |
| 1 | 68_Pin_MDR_PT1000 | MDR_68 | J3 |
| 1 | Debug Header | PinHeader_2x08_P2.54mm_Vertical | J4 |
| 1 | LED | LED_D5.0mm | D1 |
| 1 | .047uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 3 | .33uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2, C3, C4 |
| 1 | .1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5 |
| 1 | 3.3K | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 220R | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
Xineos1511LVDS-PleoraPT1000 design files
The KiCad project lives in the 7824c5a4/Xineos1511LVDS-PleoraPT1000 repository on GitHub; these links point at the commit this page was built from.
Xineos1511LVDS-PleoraPT1000: common questions
How big is the Xineos1511LVDS-PleoraPT1000 PCB?
The Xineos1511LVDS-PleoraPT1000 measures 82.8 × 99.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Xineos1511LVDS-PleoraPT1000?
14 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Xineos1511LVDS-PleoraPT1000 design files?
From the 7824c5a4/Xineos1511LVDS-PleoraPT1000 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Xineos1511LVDS-PleoraPT1000 design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which 7824c5a4 chose for the repository.