7 open source boards using the MAX3221

Real designs built with the MAX3221, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the MAX3221

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the MAX3221 connects to, and the resistors, capacitors and other passives placed on it.

  • The C1+ pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 47 nF).
  • The V+ pin has a capacitor to GND on 7 of 7 designs, most often 100 nF (then 330 nF).
  • The C1- pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 47 nF).
  • The C2+ pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 330 nF).
ENpin 1Connected to: GND 86%
C1+pin 2Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (5), 47 nF (2)
V+pin 3Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (5), 330 nF (2)
C1-pin 4Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (5), 47 nF (2)
C2+pin 5Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (5), 330 nF (2)
C2-pin 6Connected to: Signal 100%
  • Series capacitor on 100% · 100 nF (5), 330 nF (2)
V-pin 7Connected to: Signal 100%
  • Capacitor to GND on 100% · 100 nF (5), 330 nF (2)
INVALIDpin 10Connected to: Not connected 71% · a signal 29%
GNDpin 14Connected to: GND 100%
VCCpin 15Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (7)
FORCEOFFpin 16Connected to: 3.3V 71%

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Equipo AVL - vRaptor by brengi, Stm32-network rs232 by joeferner, WT-220 RPi Hat and Rear IO by tuna-f1sh and UniversalboxArm by Solartraveler.

The MAX3221 in open source designs

The gallery holds 7 open source boards using the MAX3221 from 7 GitHub repositories; a typical one measures about 120 × 80 mm and carries around 152 components.

86% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is Equipo AVL - vRaptor by brengi.

Microcontrollers on boards using the MAX3221

MAX3221: common questions

Where can I find a MAX3221 reference design?

Each of the 7 boards on this page is a real design using the MAX3221. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MAX3221 C1+ pin connected?

The C1+ pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 47 nF). Counted from the KiCad layouts of 7 open source designs using the MAX3221.

How is the MAX3221 V+ pin connected?

The V+ pin has a capacitor to GND on 7 of 7 designs, most often 100 nF (then 330 nF). Counted from the KiCad layouts of 7 open source designs using the MAX3221.

How is the MAX3221 C1- pin connected?

The C1- pin has a series capacitor on 7 of 7 designs, most often 100 nF (then 47 nF). Counted from the KiCad layouts of 7 open source designs using the MAX3221.

Which microcontrollers do boards using the MAX3221 use?

Most are built on Raspberry Pi (2), STM32 (2), NXP (1) and Microchip SAM (1).

How big is a typical board using the MAX3221?

The median is 120 × 80 mm, and 86% are two-layer designs.

What is the most popular open source board using the MAX3221?

By GitHub stars, Equipo AVL - vRaptor by brengi, with 7 stars.

Can I simulate one of these boards using the MAX3221 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part