Sensing1 0
a-mkader·UCT-Micromouse-Assignment·EEE3088F/Sensing Circuit/Sensing1_0/Sensing1_0.kicad_pcb
About the Sensing1 0 PCB
Sensing1 0 is an open source PCB design by a-mkader, published on GitHub. It is a 2-layer board measuring 80 × 20.5 mm, with 47 components from 11 distinct parts.
By type, the board carries 21 resistors, 15 jumpers, 9 diodes and 2 transistors.
From the project
EEE3088F Micro-Mouse PCB Assignment
A micromouse is, put very simply, a maze-solving robot. In this project, we will build a micromouse, focusing on the hardware of the robot, namely the power and sensing subsystems.
A more detailed description of these requirements, as well as the pinouts for this subsystem, are listed here on page 7.
Once again, a more detailed description of what exactly this module needs to do as well as its pinouts, can be found here on page 9.
Sensing1 0 bill of materials (BOM)
47 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | NPN | SOT-23 | Q1, Q2 |
| 15 | SJ_Open | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 +7 |
| 6 | LED | LED_D5.0mm_Horizontal_O1.27mm_Z15.0mm | D1, D2, D3, D4, D6, D7 |
| 3 | PhotoDiode | LED_D5.0mm_Horizontal_O1.27mm_Z15.0mm | D5, D8, D9 |
| 6 | 22 | R_0603_1608Metric | R1, R2, R4, R12, R13, R14 |
| 2 | 150 | R_0603_1608Metric | R3, R5 |
| 2 | 100 | R_0603_1608Metric | R6, R10 |
| 3 | 47k | R_0603_1608Metric | R7, R15, R18 |
| 3 | 10k | R_0603_1608Metric | R8, R16, R20 |
| 2 | 75 | R_0603_1608Metric | R9, R11 |
| 3 | 4.7k | R_0603_1608Metric | R17, R19, R21 |
Sensing1 0 design files
The KiCad project lives in the a-mkader/UCT-Micromouse-Assignment repository on GitHub; these links point at the commit this page was built from.
Sensing1 0: common questions
How big is the Sensing1 0 PCB?
The Sensing1 0 measures 80 × 20.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Sensing1 0?
47 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the Sensing1 0 design files?
From the a-mkader/UCT-Micromouse-Assignment repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Sensing1 0 design in my own project?
The repository has no license, so all rights stay with a-mkader. Use it as a reference, and ask the author before reusing the design.