Power Subsystem
a-mkader·UCT-Micromouse-Assignment·EEE3088F/Power Subsystem/KiCad/Power Subsystem.kicad_pcb
About the Power Subsystem PCB
Power Subsystem is an open source PCB design by a-mkader, published on GitHub. It is a 2-layer board measuring 36.3 × 37.2 mm, with 17 components from 10 distinct parts.
Other key parts include the MCP73831-2-OT. By type, the board carries 8 resistors, 4 capacitors, 1 IC, 1 switch and 1 diode.
From the project
EEE3088F Micro-Mouse PCB Assignment
A micromouse is, put very simply, a maze-solving robot. In this project, we will build a micromouse, focusing on the hardware of the robot, namely the power and sensing subsystems.
A more detailed description of these requirements, as well as the pinouts for this subsystem, are listed here on page 7.
Once again, a more detailed description of what exactly this module needs to do as well as its pinouts, can be found here on page 9.
Main components on the Power Subsystem
Power Subsystem bill of materials (BOM)
17 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP73831-2-OT | SOT-23-5 | U1 |
| 2 | DRV8837 | WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | Motor_1, Motor_2 |
| 1 | SW_SPDT_312 | SW-TH_SS-12D10L5 | SW1 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 2 | 4.7µF | C_0402_1005Metric | C1, C2 |
| 2 | 100nF | C_0402_1005Metric | C3, C4 |
| 2 | 6.8k | R_0603_1608Metric | R2, R3 |
| 2 | 470 | R_0402_1005Metric | R4, R5 |
| 2 | 1.2k | R_0603_1608Metric | R7, R8 |
| 2 | 3k | R_0603_1608Metric | R10, R11 |
Power Subsystem design files
The KiCad project lives in the a-mkader/UCT-Micromouse-Assignment repository on GitHub; these links point at the commit this page was built from.
Power Subsystem: common questions
How big is the Power Subsystem PCB?
The Power Subsystem measures 36.3 × 37.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power Subsystem?
17 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Power Subsystem design files?
From the a-mkader/UCT-Micromouse-Assignment repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Power Subsystem design in my own project?
The repository has no license, so all rights stay with a-mkader. Use it as a reference, and ask the author before reusing the design.