Amplificador de baja señal
aalonsopuig·KiCad_Ejemplos·Amplificador de baja señal/Amplificador de baja señal.kicad_pcb
About the Amplificador de baja señal PCB
Amplificador de baja señal is an open source PCB design by aalonsopuig, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 54 × 27 mm, with 11 components from 10 distinct parts.
By type, the board carries 4 resistors, 3 connectors and 3 capacitors.
From the project
Ejemplos de circuitos utilizados en las clases que imparto en la universidad
Amplificador de baja señal bill of materials (BOM)
11 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Entrada | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1 |
| 1 | Alimentación | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 1 | Salida | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J3 |
| 1 | BC547 | TO-92_Inline | TR1 |
| 2 | 100nF | C_Disc_D7.5mm_W2.5mm_P5.00mm | C1, C2 |
| 1 | 1uF | C_Radial_D4.0mm_H7.0mm_P1.50mm | C3 |
| 1 | 1.5k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 10 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
Amplificador de baja señal design files
The KiCad project lives in the aalonsopuig/KiCad_Ejemplos repository on GitHub; these links point at the commit this page was built from.
Amplificador de baja señal: common questions
How big is the Amplificador de baja señal PCB?
The Amplificador de baja señal measures 54 × 27 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Amplificador de baja señal?
11 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the Amplificador de baja señal design files?
From the aalonsopuig/KiCad_Ejemplos repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Amplificador de baja señal design in my own project?
Yes, under the terms of its GPL-3.0 license, which aalonsopuig chose for the repository.
More boards in KiCad_Ejemplos
Segundero 555
aalonsopuig
80 × 50 mm20 parts2LGPL-3.00NE555 frecuencia y pwm [Kicad]
aalonsopuig
50 × 40 mm15 parts2LGPL-3.00B Regulador tension variable
aalonsopuig
50.8 × 30.5 mm10 parts2LGPL-3.00Lm317 clase2
aalonsopuig
50 × 30 mm10 parts2LGPL-3.00Tracking
aalonsopuig
73 × 39 mm9 parts2LGPL-3.00Circuito 1
aalonsopuig
35.6 × 35.6 mm9 parts2LGPL-3.00Tracking voltage regulator
aalonsopuig
60 × 30 mm9 parts2LGPL-3.00Lm555 clase
aalonsopuig
39.3 × 38.8 mm7 parts2LGPL-3.00Lm555
aalonsopuig
38.8 × 24.8 mm6 parts2LGPL-3.00